Vette performance shop
Thread Starter
Burning Brakes
Joined: Aug 2006
Posts: 1,147
Likes: 18
From: Thompsons Station Tennessee
Vette performance shop
I have a 08 Coupe that I recently bought. It has a pretty stout CAM installed along with some other goodies. I thought that I could get used to the CAM but it lope's too much at idle for my taste.
Vengeance racing in Atlanta installed the CAM and told me that they threw the origional CAM away. They will make the CAM change but I would have to buy another CAM.
That being the case, I would like to know if anyone can recommend a good shop near Nashville that can do the swap?
Vengeance racing in Atlanta installed the CAM and told me that they threw the origional CAM away. They will make the CAM change but I would have to buy another CAM.
That being the case, I would like to know if anyone can recommend a good shop near Nashville that can do the swap?
Advanced
Joined: Feb 2006
Posts: 92
Likes: 1
From: Atlanta
I have a 08 Coupe that I recently bought. It has a pretty stout CAM installed along with some other goodies. I thought that I could get used to the CAM but it lope's too much at idle for my taste.
Vengeance racing in Atlanta installed the CAM and told me that they threw the origional CAM away. They will make the CAM change but I would have to buy another CAM.
That being the case, I would like to know if anyone can recommend a good shop near Nashville that can do the swap?
Vengeance racing in Atlanta installed the CAM and told me that they threw the origional CAM away. They will make the CAM change but I would have to buy another CAM.
That being the case, I would like to know if anyone can recommend a good shop near Nashville that can do the swap?
I searched ebay for you, but only found an 06 cam:
http://cgi.ebay.com/ebaymotors/06-C6...Q5fAccessories
you could keep looking there.
Thread Starter
Burning Brakes
Joined: Aug 2006
Posts: 1,147
Likes: 18
From: Thompsons Station Tennessee
EBay
Always ask to keep the part!
I searched ebay for you, but only found an 06 cam:
http://cgi.ebay.com/ebaymotors/06-C6...Q5fAccessories
you could keep looking there.
I searched ebay for you, but only found an 06 cam:
http://cgi.ebay.com/ebaymotors/06-C6...Q5fAccessories
you could keep looking there.
My 08 has a LS3 engine, I don't know if a LS2 CAM would work?
Thread Starter
Burning Brakes
Joined: Aug 2006
Posts: 1,147
Likes: 18
From: Thompsons Station Tennessee
Cam
I sent you a lengthy Email prior to checking this post. I did not have the work done as I stated. If I had I would have kept all of the removed parts for future owners as they usually ask for them. I have had many Corvettes and I know from experience that having the removed parts is a plus when selling the car later on.
My goal is to try and have the car idle closer to normal and not spend a fortune doing it. I know that Vengeance did exactly what the prior owner wanted and He was happy with the results. As the old saying goes, "it is not everyones cup of tea" and having a car that shakes and shimmies is not mine.
I look forward to hearing from you.
