Two tone interior question, pics please...
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,094
Likes: 15
From: Grant-Valkaria Florida
Two tone interior question, pics please...
Maybe I'm just getting old, but I think I've seen two tone interiors in two different layouts...am I just imagining things? 
On the bottom seat cover; Some have the center color continuing all the way out to the front edge of the seat, but some only have the perforated sections of the seat in the second color. Am I imagining things or is this correct? If correct, what determines the difference?
If you have pics, could you please post...
On the bottom seat cover; Some have the center color continuing all the way out to the front edge of the seat, but some only have the perforated sections of the seat in the second color. Am I imagining things or is this correct? If correct, what determines the difference?
If you have pics, could you please post...
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,094
Likes: 15
From: Grant-Valkaria Florida
Thank you, that answers the question, now I just have to decide which one I like better. I have to have the seat bottoms custom made because mine is Steel Gray ('05), so I could go either way. They both look good.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Feb 2007
Posts: 8,514
Likes: 235
From: Currently somewhere in IL,IN,KY,TN,MO,AR,MS,AL, or FL
I have the 3LT ebony/titanium but would prefer the 4LT look. It seems to be more symetrical as if the bucket is one color and the seat frame is another. On the other hand, it is a lot of money for one bolster when you are buying it from the factory.
Last edited by FortMorganAl; May 5, 2010 at 08:29 PM.
Life Time NCM #2196
Joined: Sep 2004
Posts: 82,596
Likes: 1,712
From: Converse TX
You really need to look at both interiors. We did that in the spring of 08 where one had the 4LT and the other the 3LT and the wife liked the 3LT better so that is what we got. I am very happy with how our center section of the seats has held up for us, but I clean them several times a month with Lexol
Here are a couple more for you
Here are a couple more for you
Last edited by peter pan; May 5, 2010 at 08:57 PM.
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,094
Likes: 15
From: Grant-Valkaria Florida
You really need to look at both interiors. We did that in the spring of 08 where one had the 4LT and the other the 3LT and the wife liked the 3LT better so that is what we got. I am very happy with how our center section of the seats has held up for us, but I clean them several times a month with Lexol
If you could make the decision again, would you make the same one?
_"SCOTT"_
Joined: Mar 2009
Posts: 6,870
Likes: 53
From: South Florida
The 3LZ shown here which is the same as the 4LT adds the leather compliments to the dash, doors and center console. Although it's $3,500 added cost for this feature, if given the choice to do it again, I wouldn't change a thing.
Life Time NCM #2196
Joined: Sep 2004
Posts: 82,596
Likes: 1,712
From: Converse TX
Here is a picture of my current interior. After looking at the picture of yours I think mine would look very close to it, yours being Titanium Gray and mine being Steel Gray. I have until Tuesday to decide...that's when it goes into the upholstery shop. I'm sure either way (3LT or 4LT design) will look good, I just hate making decisions.
If you could make the decision again, would you make the same one?
If you could make the decision again, would you make the same one?
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,094
Likes: 15
From: Grant-Valkaria Florida
Yes I am completely happy with our decision, the only part of the 4LT I do not care for is the linen on the dash, looks out of place to me. I posted pictures of ours before I added more CF items from TKO so you would have close to stock as possible only the first picture had the console cover and shifter and parking boots from a forum vendor Carskinks
_"SCOTT"_
Joined: Mar 2009
Posts: 6,870
Likes: 53
From: South Florida
Yes I am completely happy with our decision, the only part of the 4LT I do not care for is the linen on the dash, looks out of place to me. I posted pictures of ours before I added more CF items from TKO so you would have close to stock as possible only the first picture had the console cover and shifter and parking boots from a forum vendor Carskinks
When I was shopping last year I could have bought an all black 3LZ interior with VY but I went 1500 miles out of my way for this one.
Just wanted a different look since all black interiors are more common.
NVR LAT...I think your new seat skins will look awesome. Breaks up the interior just enough to look tasteful.
