C6 Corvette American Racing Headers on Sale at CCA
#1
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,681
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
C6 Corvette American Racing Headers on Sale at CCA
American Racing Headers
On Sale
Simply the Best American Made Corvette Header on the market today!
For Years now, American Racing Headers has set the standard
for high quality stainless steel exhaust products Made in the USA .
Since American Racing Headers inception they made a clear decision
to produce their products in America using the highest quality U.S.
made 304 stainless steel.
For Years now, American Racing Headers has set the standard
for high quality stainless steel exhaust products Made in the USA .
Since American Racing Headers inception they made a clear decision
to produce their products in America using the highest quality U.S.
made 304 stainless steel.
Come see our Full Line of American Racing Headers
To take advantage of our Sale Price
Please click the link below
Please click the link below
Regards
Chip
Last edited by CCA Corvette Parts; 09-05-2016 at 11:20 AM.
#3
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,681
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Link is good, it is a problem with Internet Brands, seems all my links are down...
I have let them know
In the mean time, you can go to the Custom Corvette Accessories
website and select American Racing Headers from the menu on the left
Sorry for the hassle, I'll update when the Corvette Forum has it fixed
Peace
Chip
I have let them know
In the mean time, you can go to the Custom Corvette Accessories
website and select American Racing Headers from the menu on the left
Sorry for the hassle, I'll update when the Corvette Forum has it fixed
Peace
Chip
#4
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,681
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Link is good, it is a problem with Internet Brands, seems all my links are down...
I have let them know
In the mean time, you can go to the Custom Corvette Accessories
website and select American Racing Headers from the menu on the left
Sorry for the hassle, I'll update when the Corvette Forum has it fixed
Peace
Chip
I have let them know
In the mean time, you can go to the Custom Corvette Accessories
website and select American Racing Headers from the menu on the left
Sorry for the hassle, I'll update when the Corvette Forum has it fixed
Peace
Chip
Chip
#10
Burning Brakes
#11
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,681
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
You can't just bolt on Long Tube Headers and drive around.
The Car will run dangerously Lean and throw codes.
If you run the car like that and are lucky enough not to burn
up a cylinder, you will only get about half the performance gain.
You need to tune the car.
A basic tune will be all you need "Flash Tune"
There is no need to do a custom tune for your set up because it is
so common.
You will need to either have someone local put a tune on the car
or
Simply unbolt your ECBM (4 bolts) unplug it and mail it to our friends
at East Coast Super Charging. They will flash the tune on it for you
mail it back...
Regards
Chip
The Car will run dangerously Lean and throw codes.
If you run the car like that and are lucky enough not to burn
up a cylinder, you will only get about half the performance gain.
You need to tune the car.
A basic tune will be all you need "Flash Tune"
There is no need to do a custom tune for your set up because it is
so common.
You will need to either have someone local put a tune on the car
or
Simply unbolt your ECBM (4 bolts) unplug it and mail it to our friends
at East Coast Super Charging. They will flash the tune on it for you
mail it back...
Regards
Chip
#12
Burning Brakes
You can't just bolt on Long Tube Headers and drive around.
The Car will run dangerously Lean and throw codes.
If you run the car like that and are lucky enough not to burn
up a cylinder, you will only get about half the performance gain.
You need to tune the car.
A basic tune will be all you need "Flash Tune"
There is no need to do a custom tune for your set up because it is
so common.
You will need to either have someone local put a tune on the car
or
Simply unbolt your ECBM (4 bolts) unplug it and mail it to our friends
at East Coast Super Charging. They will flash the tune on it for you
mail it back...
Regards
Chip
The Car will run dangerously Lean and throw codes.
If you run the car like that and are lucky enough not to burn
up a cylinder, you will only get about half the performance gain.
You need to tune the car.
A basic tune will be all you need "Flash Tune"
There is no need to do a custom tune for your set up because it is
so common.
You will need to either have someone local put a tune on the car
or
Simply unbolt your ECBM (4 bolts) unplug it and mail it to our friends
at East Coast Super Charging. They will flash the tune on it for you
mail it back...
Regards
Chip
Thanks. Good to know
#15
Heel & Toe
Member Since: Mar 2013
Location: Dearborn Michigan
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
You will not regret it! I recently Upgraded my 2013 GS to 1 7/8" AR Headers, X-pipe, Halltech MF103 and Borla S-type II. The peak HP gain I got of 44 rwhp is not really all that telling. I got 100hp+ and 100trq+ throughout my midrange. It definitely woke up the LS3.
#19
Race Director
#20
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,681
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Often ceramic.
It lowers the radiant heat in the engine bay.
Being that Corvette engine compartments are vented it is not
that big of a deal.
There are arguments on both sides about if it hurts or helps
Regards
Chip