2011 Grand Sport die cast
#21
Melting Slicks
I've been collecting 1:64, 1:24, & 1:18 scale 'Vettes for many years and the C6 seems to have fewer available choices than the C4 or C5 when they were unveiled. Hot Wheels had the 'exclusive' on C6 models when the car was first introduced which put other model mfgrs. back a year or two with their offerings. Same for Jada with the ZR1. The Z06 C6 came out in good time with the 'real car' introduction but a model of the GS has definitely lagged. Perhaps diecast sales are suffering as those of the full-size car and the co's. are not spending the $ for retooling. The lack of a GT2 race model surprises me as well, as there wouldn't be all that much to change from the GT1's that were offered. Not all that much new in the ERTL/Racing Champions/GMP muscle car series' either, although most of the desired ones have already been done.
#22
Le Mans Master
I've been collecting 1:64, 1:24, & 1:18 scale 'Vettes for many years and the C6 seems to have fewer available choices than the C4 or C5 when they were unveiled. Hot Wheels had the 'exclusive' on C6 models when the car was first introduced which put other model mfgrs. back a year or two with their offerings. Same for Jada with the ZR1. The Z06 C6 came out in good time with the 'real car' introduction but a model of the GS has definitely lagged. Perhaps diecast sales are suffering as those of the full-size car and the co's. are not spending the $ for retooling. The lack of a GT2 race model surprises me as well, as there wouldn't be all that much to change from the GT1's that were offered. Not all that much new in the ERTL/Racing Champions/GMP muscle car series' either, although most of the desired ones have already been done.
#23
Melting Slicks
Thread Starter
11 Corvette Grand Sport die cast
I knew Hot Wheels was going make the 11 GS,today I finally found one at WM.Here's picture of one in pearl yellow.if you want one in another color just drill out the rivets and repaint and us JB weld to keep it together.
#24
Instructor
Member Since: Apr 2011
Location: Dallas TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
i used to drill out the rivets when i was younger! i still have about 20 or so of repainted porsches, stingrays, transams and camaros
#25
Melting Slicks
Thanks, I've been checking at Target/WalMart for quite a while; these must have finally been released. I'll be at BG in a few weeks-usually some of the vendors have them as well-maybe even in other colors.
#27
Le Mans Master
GRRRRR! I still can't figure out why SOMEBODY isn't doing the Grand Sport and/or the C6R GT2 ALMS race car in 1/18. Both are very popular and I'm guessing would sell very well regardless of price. !/64 is better than nothing, but it's tiny, and basically a toy, and I think a lot of Vette owners (myself included) would be more than willing to spend the money for a high detail, high quality 1/18 model of either or both. Any manufacturers/distributors out there who can give this some consideration?
#29
Melting Slicks
Member Since: Jun 2005
Location: Rock Hill SC (Charlotte NC Area)
Posts: 2,363
Received 683 Likes
on
444 Posts
2022 C8 of the Year Finalist - Modified
2022 C7 of the Year Finalist - Unmodified
EDIT...Quick stop by Fleabay and now mine is on the way too...Thanks for the heads up!
Last edited by DWS44; 08-31-2011 at 10:28 PM.
#30
Le Mans Master
Haven't seen the blue ones yet but Wally World has tons of the yellow ones. My kids (toddlers) want one every time they go to the toy ailse. And yes, they already have 2 at home.
Richard
Richard
#31
I'm dragging this one up from the depths, hoping someone has some extra laying around. Are there any current releases of this model? I quit collecting HW's back in 2001 and just last week purchases a 1:1 2011 GS. I wouldn't mind making a replica of it in 1:64. I will need three of course so I can make it with removable tops.