Identify this front end.
Thread Starter
Racer
Joined: Dec 2004
Posts: 377
Likes: 6
From: North West, Georgia
Identify this front end.
OK ... the more i look and try to identify this particular front end .. the more i'm driving myself a bit crazy.
Its currently installed on a 2005. Whats driving me crazy is ever factory z06 or ZR1 i see the the small portion of the inlet on the very low corners (meshed) looks to be made into the 2 piece upper and lower.
This is all one piece all the way from the top to the bottom. and it does not have the large "chin" protruding out on the very bottom.
Every picture i seem to find just does not quite match up.
So either im the worst person in the world at finding a given photo on the net... it doesnt really exist .. or the photos i'm seeing just has the a view that makes it look that way.
Next even near by ill have to go and roll around the front end on all of the cars there to really get a good view on em
maybe take my own photos ;0
At some point ill prolly pull the whole thing off to see if i can find some identification marks if i cant find anything else... cause im a bit nutty that way....
But at this point im starting to second guess myself.
Its currently installed on a 2005. Whats driving me crazy is ever factory z06 or ZR1 i see the the small portion of the inlet on the very low corners (meshed) looks to be made into the 2 piece upper and lower.
This is all one piece all the way from the top to the bottom. and it does not have the large "chin" protruding out on the very bottom.
Every picture i seem to find just does not quite match up.
So either im the worst person in the world at finding a given photo on the net... it doesnt really exist .. or the photos i'm seeing just has the a view that makes it look that way.
Next even near by ill have to go and roll around the front end on all of the cars there to really get a good view on em
maybe take my own photos ;0At some point ill prolly pull the whole thing off to see if i can find some identification marks if i cant find anything else... cause im a bit nutty that way....
But at this point im starting to second guess myself.
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
It appears to be a SIC Motorsports Z06 look front fascia.
http://www.sicmsp.com/shop/part?part_id=127
http://www.sicmsp.com/shop/part?part_id=127
