Rushforth Wheels - opinions?
Thread Starter
Melting Slicks
Joined: Feb 2008
Posts: 3,248
Likes: 4
From: Palm Beach County, Florida
Rushforth Wheels - opinions?
Anyone had any dealings with this wheel manufacturer?
They seem very quality conscious and I like one or two of their designs, particularly the black widow.
Opinions on the company?
Opinions on the black widow wheel for an A/O coupe?
Thanks in advance for your comments.
http://www.rushforthwheels.com/wheels
They seem very quality conscious and I like one or two of their designs, particularly the black widow.
Opinions on the company?
Opinions on the black widow wheel for an A/O coupe?
Thanks in advance for your comments.
http://www.rushforthwheels.com/wheels
Race Director
Joined: Oct 2005
Posts: 14,555
Likes: 1,255
From: Saint Albans, WV
The Camaro can puut the 22's off due to the size of the car. It's a horrible look on the Vette. To the OP, unless they can manufacture each wheel to a specific offset/backspace you will probably be limited as to which you can buy to fit.
Melting Slicks
Joined: Jul 2001
Posts: 2,522
Likes: 30
From: Little Rock, AR, USA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Jul 2001
Posts: 2,522
Likes: 30
From: Little Rock, AR, USA
If you are really interested, I would contact "Nine ball" on this forum. He is a dealer for them and can get the best pricing available plus he has incredible knowledge on getting the right fit. Best of luck.
Last edited by rpoz06; Mar 27, 2011 at 09:28 PM.
Thread Starter
Melting Slicks
Joined: Feb 2008
Posts: 3,248
Likes: 4
From: Palm Beach County, Florida
I wasn't trying to sell you on these wheels or changing sizes - I was just showing you the end product. They make a great product but you won't find many of their wheels on new vettes as they don't cater to this crowd. They are mostly muscle car/hot rod wheel providers.
If you are really interested, I would contact "Nine ball" on this forum. He is a dealer for them and can get the best pricing available plus he has incredible knowledge on getting the right fit. Best of luck.
If you are really interested, I would contact "Nine ball" on this forum. He is a dealer for them and can get the best pricing available plus he has incredible knowledge on getting the right fit. Best of luck.
