Plastic frontend
Thread Starter
Racer
Joined: Mar 2011
Posts: 325
Likes: 6
Plastic frontend
I noticed when i got home yesterday that the plastic around the hood and passanger side headlight was sticking up. At first i thought some one pulled it up. After i looked at it better it seems to clip in. I cliped it back in but it is not flush like the drivers side. It was never flush when i got the car.My car is only 7 months old. Sorry i do not have pics.
Team Owner
Joined: Sep 2000
Posts: 25,009
Likes: 2,707
From: Far NW 'burbs of Chicago
St. Jude Donor '13
Common problem. Our 2006 was perfect (Museum Delivery), our 2009 (purchased off a dealer lot) is less perfect on one side.
If you go to fix it or have it fixed, be careful. I've seen shops make it worse.
If you go to fix it or have it fixed, be careful. I've seen shops make it worse.
Melting Slicks
Joined: Mar 2007
Posts: 3,327
Likes: 166
From: Summerton SC
Tech Contributor
My driver's side is doing this, right at the lower corner of the hood and headlight it sticks up 1/4". Not sure what to do or how to address this, the photos attached are the driver and pass. side, taken from the back towards front of car. Photos are up-close and look worse than it is. 
