When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here's a couple of things if anyone is interested. A C6 front license plate frame in SSB, an original license plate bracket for a C6 in black and a C5 front license insert in black.
The instructions state this is to be screwed to the bumper (attchd) and there are 3 double-adhesive points as well, but no screws appear to be in the unopened package (it has 2 parts numbers printed there, 15236172 and 15236175, so one may be a typo) ...
Do you think the adhesive would hold without poking holes through the fascia? I just looked at Top Flight's no-drill solution but it's $90. I wouldn't mind the factory one if the adhesive works but if you don't think so I will spend the $$ on the Top Flight. Sorry to be such a pain but I don't want you to go to the trouble of shipping it if I won't use it.
Thanks, this is awesome!
I just did some more digging. It seems that the adhesive should work but there are cases where they fall off or the plate rubs the paint until it's bare. I am going to pass and buy the Top Flight. Thanks so much for the trouble!
Last edited by unixcorn; Nov 27, 2011 at 04:08 PM.
Reason: Added more info.
Do you think the adhesive would hold without poking holes through the fascia? I just looked at Top Flight's no-drill solution but it's $90. I wouldn't mind the factory one if the adhesive works but if you don't think so I will spend the $$ on the Top Flight. Sorry to be such a pain but I don't want you to go to the trouble of shipping it if I won't use it.
Thanks, this is awesome!
I just did some more digging. It seems that the adhesive should work but there are cases where they fall off or the plate rubs the paint until it's bare. I am going to pass and buy the Top Flight. Thanks so much for the trouble!
I have had to use a front plate here in NJ on all my C6's and have never had a problem with the adhesive. I have always used the color matched front plate, but I think that has the same adhesive as the stock bracket.
Good stuff here. I've been thinking about what I can donate and all I can come up with right now is a pair of fog light bulbs that, while are not HID, are colored halogen bulbs to match the stock headlight color. They're still on the car but shouldn't take long to take out. I'm going to be removing my foglights to provide more air to my TTIX filters.
How many do you need and which gender? I have some used ones in good shape.
Just to play it safe I need like 3-4 complete. I am getting some popping/crackling noises while driving and I found at least two pins that definitely need to be changed.
Just to play it safe I need like 3-4 complete. I am getting some popping/crackling noises while driving and I found at least two pins that definitely need to be changed.
I sure could use a set of 2005 service manuals (in any condition) if someone has an old set! My 05 c6 is stock but I'm sure I can find something in the garage for a C6 to pay it forward. Thank you!!
I have (6) B106 key blanks. I will mail one each to the first 6 to pm me. They're great as a spare key that fits in your wallet ... no big bulky black plastic head.
(4) left!
OK then ... chime in on the thread and pm me your address. I think that might be OK with Racer
I have (6) B106 key blanks. I will mail one each to the first 6 to pm me. They're great as a spare key that fits in your wallet ... no big bulky black plastic head.
(4) left!
OK then ... chime in on the thread and pm me your address. I think that might be OK with Racer