Wheels Again
Thread Starter
Pro
Joined: Oct 2007
Posts: 679
Likes: 4
From: TremontonUT UT
Wheels Again
I have decided to install a set of ZR1 reproduction wheels on my 08. I have researched here and found the vendor I want. I have a couple questions though. First, is it necessary to have the wheels checked for run-out before mounting the new tires? I have bought two sets of truck rims in the last two years. All eight were within tolerance what ever that was. I take it I should have new TPMS seals installed. Anything else I need to be concerned with? Thanks. Later! Frank 
_Sloth Whisperer_
Joined: Jul 2008
Posts: 3,369
Likes: 9
From: Malaysia Air Flight 370
House of Wheels customer here, wheels were almost perfect. My front two had a fairly glossy black powdercoat, while my rears were slightly more matte. Obviously a powdercoating issue, less a production issue.
They ran perfectly true to my eye and balanced very well. Never felt a vibration or experienced any abnormal wear.
They ran perfectly true to my eye and balanced very well. Never felt a vibration or experienced any abnormal wear.
