Finished up the interior...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
:iagree
Advanced
Joined: Mar 2012
Posts: 61
Likes: 0
From: Hemlock MI
Car is an 2006 Z06. I wrapped up the interior work about a week ago and just wanted to share some photos I took this weekend.
I did a 3LZ Dash transplant and door panel swap with Centennial Edition parts. Console/shifter/etc. parts are also from the Centennial Edition. Steering wheel is from APSIS and its all topped off with Caravaggio Seats.
There are a few other small things, but call outs are the functional 2012+ dash tweeters, Elite Engineering Pedals, and the F55 dual mode exhaust controller. Alcantara/suede is the material used on most of the primary touch points.
I wanted to keep the style OEM-ish with premium touches in key areas. With all the different types of accessories and parts available, it is very easy to go over the top with these cars and I felt this strikes a good balance. This was accomplished by utilizing the best of the OEM parts while upgrading the weaknesses with higher quality aftermarket stuff.
This is probably nothing special for the existing 4LT/3ZR/3LZ guys who may have similar parts already, but coming from an older 2LZ, I couldn't be happier with how it all turned out.
Anyway, if you're still reading, thanks. For those who just want to see pictures, well, here they are.
I did a 3LZ Dash transplant and door panel swap with Centennial Edition parts. Console/shifter/etc. parts are also from the Centennial Edition. Steering wheel is from APSIS and its all topped off with Caravaggio Seats.
There are a few other small things, but call outs are the functional 2012+ dash tweeters, Elite Engineering Pedals, and the F55 dual mode exhaust controller. Alcantara/suede is the material used on most of the primary touch points.
I wanted to keep the style OEM-ish with premium touches in key areas. With all the different types of accessories and parts available, it is very easy to go over the top with these cars and I felt this strikes a good balance. This was accomplished by utilizing the best of the OEM parts while upgrading the weaknesses with higher quality aftermarket stuff.
This is probably nothing special for the existing 4LT/3ZR/3LZ guys who may have similar parts already, but coming from an older 2LZ, I couldn't be happier with how it all turned out.
Anyway, if you're still reading, thanks. For those who just want to see pictures, well, here they are.
Pro
Joined: Feb 2012
Posts: 652
Likes: 0
From: Orange, Connecticut Boynton Beach,Florida
You really went all out!!excellent work , taste and selection !!! Nice, just perfect!!I have a 08 w/3LZ Ebony/Ivory Interior, I intend to grab a set of the Carvagio seats and some of the newer style interior pieces, you just inspired me with the great work that went into yours!!!I love it all, Congrats!!!
