bucwheat

Anyone figured out how to cover the front of the seat rails,my wife complains about hurting her heals on them when the seat is all the way back,i cut some air hose and put them on but the get knocked off.

ncvette_1FUNRIDE

Mine came with covers. So yours are missing? Get new ones at your Chevrolet dealer parts department.

http://stores.revolutionparts.com/gm...umber=19293301

http://stores.revolutionparts.com/gm...&position=left

See part # 20 in 1st link diagram.

vetteright

I have never seen a C6 with seat rail covers. Mine has covers over the seat rail mounting bolts, but not the exposed ends of the rails. I even researched this on Gene Culley's (Cultrag Performance) web site and according to the GM Parts diagram, there are not any shown or listed.

ncvette_1FUNRIDE

OK, I was thinking of the mounting brackets. I have never had a problem with the actual rails and I push my seat all the way back.

I could get my heels back that far anyway.

bucwheat

That maybe what im looking for,thanks.

Gene Culley

Thank you for the mention. We would certainly be happy to help out with any questions.

vetteright

Those are the covers that hide the two front seat rail mounting bolts. They do not fit over the seat rail ends.

montereyredvette

My wife gouged her heel the first week I had the car, came up with simple solution: buy a large diameter rad hose that has a 90 degree bend, cut to fit, snap it over the seat rail.

bucwheat

I did something like that with smaller fuel line,it gets kicked off sometime but it works.