Need help with tail light harness
Thread Starter
Supporting Vendor
Joined: Jul 2010
Posts: 8,550
Likes: 903
From: Republic of Texas
Need help with tail light harness
We're working on a new project to eliminate the need for splicing in load resistors with LED tail lights. Since I don't have a C6 in my garage I need help identifying the location of and the part number (male and female) the rear light harness. If you happen to have a pin-out diagram of the wiring that would be great too.
thanks.
thanks.
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
Not sure this is what you're after but see posts 10 and 11 in here:
https://www.corvetteforum.com/forums...post1586245568
https://www.corvetteforum.com/forums...post1586245568
Thread Starter
Supporting Vendor
Joined: Jul 2010
Posts: 8,550
Likes: 903
From: Republic of Texas
Okay, got the parts needed and a customer willing to be guinea pig. I just need one more detail.
I checked a club member's C6 for a suitable mounting location for the resistor pack away from the radio antenna and saw a bolt (possible ground point) welded to the outside of the passenger frame rail aft of the rear wheels. I didn't have a measuring tape with me at the time and I need to know roughly how far away this bolt sits from the rear cross member.
For any bonus assistance. If someone want to let me know how much wire would be needed to go from this bolt to the rear harness connector, that would be of great help.
I checked a club member's C6 for a suitable mounting location for the resistor pack away from the radio antenna and saw a bolt (possible ground point) welded to the outside of the passenger frame rail aft of the rear wheels. I didn't have a measuring tape with me at the time and I need to know roughly how far away this bolt sits from the rear cross member.
For any bonus assistance. If someone want to let me know how much wire would be needed to go from this bolt to the rear harness connector, that would be of great help.
