Front Lic Plate!

www.topflightrepro.com
www.topflightrepro.com
Their plate holder design looks better than factory. Easy install. I put a tinted plate cover on from autozone, it blended the plate into the car even more.
The Best of Corvette for Corvette Enthusiasts
Front plates are required here in NYS but most guys don't run them because cops generally don't care. At least in my area.
Last edited by Bruze; Nov 14, 2015 at 09:55 AM.
The C6 just does not look good with a front plate...they ruin the nice lines of the car.
What really bites, is that 7 of our 10 Provinces do not require 2 plates.
If 7 don't need 2 plates, why do the other 3 need them????
That is a bone of contention with me and others.
I've tried to sway the government, the ones about to form government, but they say it's for the safety of the public...really?????
So 7 Provinces don't give a Rat's butt about the public safety?
That's my rant
The C6 just does not look good with a front plate...they ruin the nice lines of the car.
What really bites, is that 7 of our 10 Provinces do not require 2 plates.
If 7 don't need 2 plates, why do the other 3 need them????
That is a bone of contention with me and others.
I've tried to sway the government, the ones about to form government, but they say it's for the safety of the public...really?????
So 7 Provinces don't give a Rat's butt about the public safety?
That's my rant

I remember as a kid traveling to Pa. where inspections were required for any vehicle, but weren't in NYS unless the car was real old, so we were legal in Pa.
And cars from states that don't require front plates can drive legally in NYS.
Who knows what the laws are nowadays, have no clue.
Last edited by Bruze; Nov 14, 2015 at 10:17 AM.
I remember as a kid traveling to Pa. where inspections were required for any vehicle, but weren't in NYS unless the car was real old, so we were legal.
And cars from states that don't require front plates can drive legally in NYS.
Who knows what the laws are nowadays, have no clue.
Maybe once they see we are from Canada, they don't have any legal jurisdiction on the plate law. I do carry, in my glove box, the rules that our province has for plates, just in case I am ever questioned.





Last edited by Redvette2; Nov 14, 2015 at 12:37 PM.
Many plate holders, including the GM factory plate holder, are stuck with two sided tape. No drilling is required. The plate holders may leave marks on the paint just from vibrating against the paint as you drive.
I had my factory plate holder on for many years and removed it, there were several marks that fortunately did buff out, but no drilling is required.





















