Drivers side window
Melting Slicks
Joined: Feb 2014
Posts: 3,123
Likes: 412
From: Miami FL
Follow the steps below to rest the window indexing function on the Corvette C6.
1. Close the door.
2. Raise the window by pulling up the on the window switch.
3. After the window full closes, hold the up switch in the up position for three seconds and then release the switch.
4. Hold the window switch in the up position again for three seconds and release.
This is called resetting of the window indexing or power window initialize and is in the owner’s manual. See page 2-17 of the 2005 owner’s manual, page 2-18 of the 2006 owner’s manual, page 87 of the 2007 owner’s manual, page 2-18 of the 2008 owner’s manual, page 2-18 of the 2009 owner’s manual, page 3-18 of the 2010 owner’s manual, or 2-18 of the 2011 owner’s manual.
1. Close the door.
2. Raise the window by pulling up the on the window switch.
3. After the window full closes, hold the up switch in the up position for three seconds and then release the switch.
4. Hold the window switch in the up position again for three seconds and release.
This is called resetting of the window indexing or power window initialize and is in the owner’s manual. See page 2-17 of the 2005 owner’s manual, page 2-18 of the 2006 owner’s manual, page 87 of the 2007 owner’s manual, page 2-18 of the 2008 owner’s manual, page 2-18 of the 2009 owner’s manual, page 3-18 of the 2010 owner’s manual, or 2-18 of the 2011 owner’s manual.
Team Owner
Joined: May 2004
Posts: 82,175
Likes: 1,319
From: McKinney TX
St. Jude Donor '21-'22-'23-'24
