Got board with Vinyl wrap printer
#1
7th Gear
Thread Starter
Got board with Vinyl wrap printer
So we got board with our vinyl wrap printer and decided to give wrapping my dash a try with a crazy design to see how it looked and how hard it would be to do. Dash was easy to wrap the gauge cluster will be getting re wrapped since i didn't have the proper glues to hold the tight corners plus were going to change the pattern also to add in some more color.
The following users liked this post:
kite167 (10-01-2020)
The following 3 users liked this post by Never-Enough:
The following 2 users liked this post by 703:
Dakota Hitchcock (04-29-2016),
kite167 (10-01-2020)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
#5
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,260
Received 1,675 Likes
on
1,298 Posts
C6 of Year Finalist (appearance mods) 2019
Nice job but not to my taste.
The following users liked this post:
Dakota Hitchcock (04-29-2016)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
The following users liked this post:
Dakota Hitchcock (04-29-2016)
#15
Melting Slicks
When I was a kid I covered the dash on my '62 Corvair Monza with walnut shelf paper. It looked better than that. BTW, isn't that a huge crack in your windshield? Don't know about TN, but it's illegal here in CA.
Last edited by RagTop69; 04-29-2016 at 12:52 PM.
The following users liked this post:
wideglideleon (09-29-2020)
The following users liked this post:
Dakota Hitchcock (04-29-2016)