What did you do to your C6 this weekend?
#401
Installed LED switchback DRLs and yellow LED fog bulbs. Really loving this new look! Got the bulbs and resistor for 70 from Amazon, all very high quality kit. Quite happy and ready to take out out tomorrow after a good wash.
#403
Pro
Replaced both hood supports. Now it holds itself up again
Also installed the NPP in a box kit. I installed the mufflers a year ago without the kit to swap modes.
Also installed the NPP in a box kit. I installed the mufflers a year ago without the kit to swap modes.
#405
Instructor
Well that was my previous point: The so-called "smart" phones should be able to do that without first exporting it to a computer, manipulating the image to where you want it, then exporting it again to a website.
If I had to do all that, I wouldn't ever bother posting any pictures, ain't worth it.
Anybody cooking hot dogs today?
If I had to do all that, I wouldn't ever bother posting any pictures, ain't worth it.
Anybody cooking hot dogs today?
#408
Team Owner
I bought this and installed it in the garage: Here is the link to it on the Forum with pics -
https://www.corvetteforum.com/forums...post1592748672
I picked up a used lift a Bendpak LR-60 P from another member on Saturday for the Vette - here are some specs: This thing works awesom
I have wanted and needed a lift for quite some time and I ended up getting this one for $875 from Rod (thanks Rod)
http://www.bendpak.com/car-lifts/spe...ts/lr-60p.aspx
Lifting capacity: 6,000 lbs. / 2,722 kg
Max capacity front axle: 3,000 lbs. / 1,361 kg
Max capacity rear axle: 3,000 lbs. / 1,361 kg
Max lifting height without blocks: 26" / 660 mm
Max lifting height with 1-1/2" blocks: 27-1/2" / 698-1/2 mm
Max lifting height with optional 3" blocks: 29" / 737 mm
Overall pad length: 53" / 1,346
Overall width: 70-1/2" / 1,791 mm
Overall length: 82" / 2,083 mm
Lowered height: 4" / 102 mm
Lifting time: 35 sec
Lift pad dimension: 18" x 52" / 457 mm x 2,591 mm
Motor: 115/208-230 VAC / 50/60 Hz. 1Ph*
Shipping weight: 814 lbs. / 370 kg
Shipping dimensions: 82" x 70" x 20" / 2,083 mm x 1,778 mm x 508 mm
Thanks,Matt
https://www.corvetteforum.com/forums...post1592748672
I picked up a used lift a Bendpak LR-60 P from another member on Saturday for the Vette - here are some specs: This thing works awesom
I have wanted and needed a lift for quite some time and I ended up getting this one for $875 from Rod (thanks Rod)
http://www.bendpak.com/car-lifts/spe...ts/lr-60p.aspx
Lifting capacity: 6,000 lbs. / 2,722 kg
Max capacity front axle: 3,000 lbs. / 1,361 kg
Max capacity rear axle: 3,000 lbs. / 1,361 kg
Max lifting height without blocks: 26" / 660 mm
Max lifting height with 1-1/2" blocks: 27-1/2" / 698-1/2 mm
Max lifting height with optional 3" blocks: 29" / 737 mm
Overall pad length: 53" / 1,346
Overall width: 70-1/2" / 1,791 mm
Overall length: 82" / 2,083 mm
Lowered height: 4" / 102 mm
Lifting time: 35 sec
Lift pad dimension: 18" x 52" / 457 mm x 2,591 mm
Motor: 115/208-230 VAC / 50/60 Hz. 1Ph*
Shipping weight: 814 lbs. / 370 kg
Shipping dimensions: 82" x 70" x 20" / 2,083 mm x 1,778 mm x 508 mm
Thanks,Matt
The following users liked this post:
sneal46 (10-31-2020)
#409
I flew in to Kansas City, bought a 2012 Torch Red M6 GS on Monday -- drove it home on I-90 to Seattle. Got home on Friday and this weekend cleaned it all up from the road dirt and grime of 2000 miles. She looks so nice next to my black 2013 M6 GS. pics to come later.
#410
You have enough posts here to know better.
#412
Le Mans Master
I bought this and installed it in the garage: Here is the link to it on the Forum with pics -
https://www.corvetteforum.com/forums...post1592748672
I picked up a used lift a Bendpak LR-60 P from another member on Saturday for the Vette - here are some specs: This thing works awesom
I have wanted and needed a lift for quite some time and I ended up getting this one for $875 from Rod (thanks Rod)
http://www.bendpak.com/car-lifts/spe...ts/lr-60p.aspx
Lifting capacity: 6,000 lbs. / 2,722 kg
Max capacity front axle: 3,000 lbs. / 1,361 kg
Max capacity rear axle: 3,000 lbs. / 1,361 kg
Max lifting height without blocks: 26" / 660 mm
Max lifting height with 1-1/2" blocks: 27-1/2" / 698-1/2 mm
Max lifting height with optional 3" blocks: 29" / 737 mm
Overall pad length: 53" / 1,346
Overall width: 70-1/2" / 1,791 mm
Overall length: 82" / 2,083 mm
Lowered height: 4" / 102 mm
Lifting time: 35 sec
Lift pad dimension: 18" x 52" / 457 mm x 2,591 mm
Motor: 115/208-230 VAC / 50/60 Hz. 1Ph*
Shipping weight: 814 lbs. / 370 kg
Shipping dimensions: 82" x 70" x 20" / 2,083 mm x 1,778 mm x 508 mm
Thanks,Matt
https://www.corvetteforum.com/forums...post1592748672
I picked up a used lift a Bendpak LR-60 P from another member on Saturday for the Vette - here are some specs: This thing works awesom
I have wanted and needed a lift for quite some time and I ended up getting this one for $875 from Rod (thanks Rod)
http://www.bendpak.com/car-lifts/spe...ts/lr-60p.aspx
Lifting capacity: 6,000 lbs. / 2,722 kg
Max capacity front axle: 3,000 lbs. / 1,361 kg
Max capacity rear axle: 3,000 lbs. / 1,361 kg
Max lifting height without blocks: 26" / 660 mm
Max lifting height with 1-1/2" blocks: 27-1/2" / 698-1/2 mm
Max lifting height with optional 3" blocks: 29" / 737 mm
Overall pad length: 53" / 1,346
Overall width: 70-1/2" / 1,791 mm
Overall length: 82" / 2,083 mm
Lowered height: 4" / 102 mm
Lifting time: 35 sec
Lift pad dimension: 18" x 52" / 457 mm x 2,591 mm
Motor: 115/208-230 VAC / 50/60 Hz. 1Ph*
Shipping weight: 814 lbs. / 370 kg
Shipping dimensions: 82" x 70" x 20" / 2,083 mm x 1,778 mm x 508 mm
Thanks,Matt
The following users liked this post:
Bruze (08-01-2016)
#415
#417
Dude everything happened so quick.
I had plans for my gs. Was going to put a blower this winter lol.
But I kept getting the news feed on my Facebook on the Grand sport lol. And then I started to watch youtube videos lol.
Then I couldn't wait for the manual grand sport to arrive so got a leftover '16 z06 instead lol
Literally it all happened in a couple of days. Only real goodbye I made to my gs was on the drive to the dealer. But I had a feeling it would be the last drive lol.
But at least I kept my word on never getting a base c7. No way. Wide body all the way.
And the tails I'm still getting used to. Lol. It looks weird.
But the rest of the car is incredible.
I had plans for my gs. Was going to put a blower this winter lol.
But I kept getting the news feed on my Facebook on the Grand sport lol. And then I started to watch youtube videos lol.
Then I couldn't wait for the manual grand sport to arrive so got a leftover '16 z06 instead lol
Literally it all happened in a couple of days. Only real goodbye I made to my gs was on the drive to the dealer. But I had a feeling it would be the last drive lol.
But at least I kept my word on never getting a base c7. No way. Wide body all the way.
And the tails I'm still getting used to. Lol. It looks weird.
But the rest of the car is incredible.
#419
Melting Slicks
Mine is just sitting there this weekend, maybe I'll go wash it. It's almost out of gas and the local station is completely out of gas. Went for a motorcycle ride this morning and most of the stations are out of premium. They fixed the Colonial Pipeline on Wednesday but the shortages seem to be getting worse. Think I'll drive the truck next week, it's 3/4 full and perfectly happy with regular.
#420
Pro
Corvette Weekend
The wife and I, along with 3 other 'Vettes, and 6 other people, took a nice cruise to Galena Il. Drove on some spectacular curvy roads on the way there. Altogether 376 miles on 13.5 gallons of gas.....including some "spirited" driving....27.8 MPG!!! These Grand Sports were made to be driven on these curvy roads. A couple of Bikers left 1/2 hour before us, on these twisty roads. 50 miles later, we caught them! A few of our group, found out some things these cars will do! Great times....not soon to be forgotten!