Check out Joe's Gold C6!
#2
Race Director
Under hood beautiful!
Back end not so much.
Why would you use what look like C5 logos on those tail light covers?
Back end not so much.
Why would you use what look like C5 logos on those tail light covers?
Last edited by EVRose; 08-01-2016 at 02:52 PM.
The following users liked this post:
American Car Craft (08-01-2016)
The following users liked this post:
American Car Craft (08-01-2016)
The following users liked this post:
American Car Craft (08-01-2016)
#5
Safety Car
The following users liked this post:
American Car Craft (08-01-2016)
#6
Former Vendor
Thread Starter
It is not Chrome, it is stainless steel.
Actually stainless steel deals with heat phenomenally. The stainless we use in fabrication (304) is also commonly used in heat exchangers because it can withstand high amounts of heat (up to 1500 F) and it does not hold onto heat. Which is why it's commonly used in heat exchangers for refrigeration.
A common misconception is that stainless steel retains heat due to its usage in cookware. But if you turn most stainless cookware upside down you'll almost always notice a copper or aluminum "core" that comes into contact with the burner. This is because stainless steel has relatively poor thermal conductivity.
Multi-core stainless steel cookware.
You can learn more about 304 stainless here:
http://www.azom.com/article.aspx?ArticleID=965
https://www.marlinwire.com/blog/what...-vs-316-vs-330
Actually stainless steel deals with heat phenomenally. The stainless we use in fabrication (304) is also commonly used in heat exchangers because it can withstand high amounts of heat (up to 1500 F) and it does not hold onto heat. Which is why it's commonly used in heat exchangers for refrigeration.
A common misconception is that stainless steel retains heat due to its usage in cookware. But if you turn most stainless cookware upside down you'll almost always notice a copper or aluminum "core" that comes into contact with the burner. This is because stainless steel has relatively poor thermal conductivity.
Multi-core stainless steel cookware.
You can learn more about 304 stainless here:
http://www.azom.com/article.aspx?ArticleID=965
https://www.marlinwire.com/blog/what...-vs-316-vs-330
#7
Former Vendor
Thread Starter
#8
Safety Car
The following users liked this post:
American Car Craft (08-02-2016)
#9
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,259
Received 1,675 Likes
on
1,298 Posts
C6 of Year Finalist (appearance mods) 2019
I like the under hood part!
The following users liked this post:
American Car Craft (08-02-2016)
#10
Le Mans Master
I'm not a chrome (SS) fan, but nice craftsmanship just the same...Well done.
Last edited by BlindSpot; 08-01-2016 at 06:17 PM.
The following users liked this post:
American Car Craft (08-02-2016)
#11
Team Owner
Member Since: May 2000
Location: Plantation Florida USAF(Retired) 1966-1990
Posts: 47,895
Received 4,505 Likes
on
3,590 Posts
U.S. Air Force
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
NCM Sinkhole Donor
Sweet!
The following users liked this post:
American Car Craft (08-02-2016)
#13
Team Owner
Underhood looks awesome, have to pass on the rest.
The following users liked this post:
American Car Craft (08-02-2016)
The following users liked this post:
American Car Craft (08-02-2016)
The following users liked this post:
American Car Craft (08-02-2016)
#17
Racer
#19
Racer
Ric and his staff at American car craft do some amazing work. I live near by and have watched him grow over the years. You will never be disappointed in the quality of their workmanship or the fact that they can design and make most anything. This past spring I attended their car show and the trophies that were presented were beautiful pieces of art.
The following users liked this post:
American Car Craft (08-02-2016)
The following users liked this post:
American Car Craft (08-02-2016)