asking about some experience
Thread Starter
Advanced
Joined: Feb 2017
Posts: 87
Likes: 1
From: NY
asking about some experience
Hi
I have corvette c6 zo6 2008 with ECS kit and MSD intake and mcload clutch and I have upgraded my block with 432ci and I have added a Darton sleeves on my block bore 4.145 . and my heads are bone stock
Now my issue is I need to install ls7 supercharged cam shaft I need a good drivability and not much noise choppy sound because I will be using my car each day I need cam shaft that gives me good power 30-45 hp more . liver noise has offer me this camshaft any one recommend it for me ?
POWERSTORM LS7 STAGE 2B CAMSHAFT
Intake Lift 230@.050
Exhaust Duration 244@.050
Intake Lift .627"
Exhaust Lift .648"
LSA 116
Thanks ,
I have corvette c6 zo6 2008 with ECS kit and MSD intake and mcload clutch and I have upgraded my block with 432ci and I have added a Darton sleeves on my block bore 4.145 . and my heads are bone stock
Now my issue is I need to install ls7 supercharged cam shaft I need a good drivability and not much noise choppy sound because I will be using my car each day I need cam shaft that gives me good power 30-45 hp more . liver noise has offer me this camshaft any one recommend it for me ?
POWERSTORM LS7 STAGE 2B CAMSHAFT
Intake Lift 230@.050
Exhaust Duration 244@.050
Intake Lift .627"
Exhaust Lift .648"
LSA 116
Thanks ,
Race Director
Joined: Dec 2002
Posts: 10,467
Likes: 1,149
From: Wayne Township WI
Whoa there, partner.
Stock heads w/ what you're running?
You don't need a cam, not quite yet.
What you do need is heads rebuilt, right now.
You MUST post this in Z06 forum, here: https://www.corvetteforum.com/forums.../?prefixid=z06
10 yr Z06 owner here, many others @ Z06.
Really need to post this over there for other owners input.
OK?
