LEDs?
#21
Racer
Complete Interior LED kit for C6 - Using Cree XP-E LED bulbs for powerful output and pure classy white color:
Comparison to factory cargo lights....it's like the factory lights aren't even on.
Comparison to factory foot well and map lights. Again, It's like they factory ones aren't even on.
Order Here:
https://radioflyerinnovations.com/sh...ion-kit&page=1
Comparison to factory cargo lights....it's like the factory lights aren't even on.
Comparison to factory foot well and map lights. Again, It's like they factory ones aren't even on.
Order Here:
https://radioflyerinnovations.com/sh...ion-kit&page=1
Dang I just ordered the blue, looking at your photos the white does look clean!
#22
$80 for 6x LED bulbs is absolute highway robbery. Those bulbs are like $3 each after markup on other websites. Just go order some on SuperBrightLEDs.
Last edited by theandrewo; 07-12-2018 at 01:55 PM.
#24
#27
Supporting Vendor
Yes Sir:
https://radioflyerinnovations.com/sh...d-light&page=2
Installs in seconds (in your factory location)
https://radioflyerinnovations.com/sh...d-light&page=2
Installs in seconds (in your factory location)
The following users liked this post:
LS WON (07-25-2018)
The following users liked this post:
LS WON (07-25-2018)
#30
Team Owner
yes sir:
https://radioflyerinnovations.com/sh...d-light&page=2
installs in seconds (in your factory location)
https://radioflyerinnovations.com/sh...d-light&page=2
installs in seconds (in your factory location)
The following users liked this post:
LS WON (07-25-2018)
#32
Racer
Yeah I actually ordered the blue ones from SuperBrightLEDs, but have yet to get the dang map bulbs out lol! Tried the tape trick, zip tie, small vice grips, they wont seem to budge out of there! I haven't tried the dental floss, maybe that might work better.
#34
I used a very small flathead screwdriver to leverage them out. Only took a couple seconds, try that. Or maybe try 2 small screwdrivers on each side to even out the leverage.
#36
Melting Slicks
Nonsense. A greater amount of chips does not make any difference in the quality of the bulb. Smaller led bulbs tend to use smaller chips (3528) or one big one (5050) because that's what fits. Bigger bulbs (reverse lights, stop lamps etc..) can use a bigger led chip like the 5050 or 5630
#38
Nonsense. A greater amount of chips does not make any difference in the quality of the bulb. Smaller led bulbs tend to use smaller chips (3528) or one big one (5050) because that's what fits. Bigger bulbs (reverse lights, stop lamps etc..) can use a bigger led chip like the 5050 or 5630
Could you post side by side comparisons of light output to competitor brands, longevity testing, and lumen measurement? Not saying you're wrong, but I'd have to see data supporting your claim that these bulbs are "better" before I spend 2x-3x the cost on an LED bulb.
#39
Melting Slicks
Right?
Could you post side by side comparisons of light output to competitor brands, longevity testing, and lumen measurement? Not saying you're wrong, but I'd have to see data supporting your claim that these bulbs are "better" before I spend 2x-3x the cost on an LED bulb.
Could you post side by side comparisons of light output to competitor brands, longevity testing, and lumen measurement? Not saying you're wrong, but I'd have to see data supporting your claim that these bulbs are "better" before I spend 2x-3x the cost on an LED bulb.
#40
Melting Slicks
Right?
Could you post side by side comparisons of light output to competitor brands, longevity testing, and lumen measurement? Not saying you're wrong, but I'd have to see data supporting your claim that these bulbs are "better" before I spend 2x-3x the cost on an LED bulb.
Could you post side by side comparisons of light output to competitor brands, longevity testing, and lumen measurement? Not saying you're wrong, but I'd have to see data supporting your claim that these bulbs are "better" before I spend 2x-3x the cost on an LED bulb.