Dashlogic
Le Mans Master
Joined: May 2016
Posts: 7,344
Likes: 1,547
From: Florida
It plugs into the OBD port. The 5v analog terminals are for additions such as a wideband. I used mine with a wideband, so both data shows in the HUD. It is not intrusive. I'm 6'5" and no clearance problems if that is your Q.
Safety Car
Joined: Nov 2005
Posts: 4,404
Likes: 951
From: Huntsville Alabama
I have one in mine. and I use this https://www.amazon.com/gp/product/B00EECXAY8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&th =1
that way its not even in the way, and you can tuck flat cable up inside the panel above you feet, and run it to where ever you want. ther eis a gap in the center like behind the ashtray area it lays nice and out og the way awith it easly pulled out to swap profiles or remove to make changes.
also if you need the facroty port you can just unplud the flat adapter leaving all the dashlogic in place.
that way its not even in the way, and you can tuck flat cable up inside the panel above you feet, and run it to where ever you want. ther eis a gap in the center like behind the ashtray area it lays nice and out og the way awith it easly pulled out to swap profiles or remove to make changes.
also if you need the facroty port you can just unplud the flat adapter leaving all the dashlogic in place.
Last edited by mittens; Oct 22, 2018 at 09:29 AM.
Team Owner
Joined: Aug 2006
Posts: 25,105
Likes: 3,156
C6 of Year Finalist (appearance mods) 2019
I have a similar splitter but it is shorter. Use a Window Valet and my V1 radar detector. Have used it since they came out with no problems. Have the wires tucked into the panel below the steering wheel.
Love having the V1 info on the HUD.
Love having the V1 info on the HUD.
Safety Car
Joined: Nov 2005
Posts: 4,404
Likes: 951
From: Huntsville Alabama
How do you have a V1 info on screen? I Have a blend mount and a V1 in my car too but did not know they work together?
Unless your confusing dashtronix with dashlogic?
Unless your confusing dashtronix with dashlogic?
Last edited by mittens; Oct 22, 2018 at 10:48 AM.
Thread Starter
Intermediate
Joined: Jun 2011
Posts: 38
Likes: 0
I have a 2011 grand sport with manual transmission. Is there any way I can program driver info center to show transmission oil temperature without buying dashlogic.I do not race and do not really need to know all the other stuff.
Team Owner
Joined: Aug 2006
Posts: 25,105
Likes: 3,156
C6 of Year Finalist (appearance mods) 2019
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette & Porsche 911: How Two Icons Conquered the Last 25 Years
Joe Kucinski
2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!
Michael S. Palmer
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
Team Owner
Joined: Dec 2012
Posts: 30,427
Likes: 1,609
From: Outside the Quick Stop N.J.
AFAIK, no. I have a 13 GS and cannot show the trans temp with just the factory display. I am not even sure that the Dashlogic gives you that option, I will have to check on mine.