Column lock
#1
Heel & Toe
Thread Starter
Column lock
My car won’t start and it reads: service column lock. It seems it would cost a lot of money to fix and not even sure that will get it going. It was perfect until now. I see a lot recommendations for a bypass as a better option. Is it effective?
The following users liked this post:
orkka69 (12-13-2018)
The following users liked this post:
orkka69 (12-13-2018)
#6
Instructor
FYI The steering column has to be unlocked before the column lock eliminator can be installed. Also if you have the"service steering column lock" message and you plug the eliminator in and the message still wont clear then you will probably need to repl. the column lock control module which is the black box that the eliminator plugs into. I had to repl. the control module on mine with the eliminator and its been 2 years no issues
The following users liked this post:
orkka69 (12-13-2018)
#7
Race Director
https://www.corvetteforum.com/forums...n-from-gm.html
Posted this AM, copy TSB# & take it to a competent dealer.
Supposedly GM will pay for this repair, ending this fiasco forever.
Posted this AM, copy TSB# & take it to a competent dealer.
Supposedly GM will pay for this repair, ending this fiasco forever.
The following users liked this post:
orkka69 (12-13-2018)