Driver seat problem
Thread Starter
Instructor
Joined: Jan 2015
Posts: 203
Likes: 2
From: Port Costa CA
Driver seat problem
2011 ZR! seat stuck rear position. After many hours of struggling got the seat unbolted. I checked the power wires from the main harness and found 2 with no power. Checked fuses and they were blown. Put new fuses in and sure enough blown again. I unhooked the main harness going to the seat and put new fuses in they remained ok until I plugged main harness back in. I have a short.! But where?
If I plug in my Chinese Tech 11 , I can get the seat to function all ways. I don't understand that. I am suspecting the memory seat module may have a short in it because if I unplug it with the main harness under seat connected to the seat harness the fuses don't blow.
So what you experts think it could be other than the memory seat module? Oh also no power to the seat switch anytime..
If I plug in my Chinese Tech 11 , I can get the seat to function all ways. I don't understand that. I am suspecting the memory seat module may have a short in it because if I unplug it with the main harness under seat connected to the seat harness the fuses don't blow.
So what you experts think it could be other than the memory seat module? Oh also no power to the seat switch anytime..
