Dashlogic and ride height sensor voltage
Thread Starter
Melting Slicks
Joined: Nov 2010
Posts: 2,315
Likes: 737
From: New Jersey-ish
2024 C6 of the Year Winner - Unmodified
Dashlogic and ride height sensor voltage
I found 4 PIDs in the Dashlogic configuration that correspond to each corner of the car, labeled as position sensor voltage. Problem is they all show 0.000V with key on engine off. I thought this would be an easy way to see if my ride height sensors were near 2.9V, guess not. Or do these only work with the engine running? Is there anyway to see these voltages without a Tech2?
I also see two separate spark retard PIDs, knock retard, and torque management spark retard. I have put these on my HUD to see what’s what.
I also see two separate spark retard PIDs, knock retard, and torque management spark retard. I have put these on my HUD to see what’s what.
