Service Active Handling Code C0710-1F
Thread Starter
Advanced
Joined: Aug 2020
Posts: 51
Likes: 7
From: Florida
Service Active Handling Code C0710-1F
When I start the car the "Service Active Handling" message pops up on the dash. I pulled the code with my scanner and the DTC code is "C0710-1F Steering Position Signal Intermittent." I clear the code and the service active handling message goes away but comes back shortly after. Has anyone had the same issue? What did you do to fix it? Thanks.
Drifting
Joined: Mar 2010
Posts: 1,901
Likes: 361
From: TX
It's probably the connector for the steering sensor. GM had a recall on them that involved sticking a plastic comb like device in the backshell of the connector in a feeble attempt to tighten up the contacts.
https://static.nhtsa.gov/odi/rcl/201...0V172-2715.pdf
https://static.nhtsa.gov/odi/rcl/201...0V172-2715.pdf
Last edited by CSixDude; Apr 10, 2024 at 10:26 AM.
Drifting
Joined: Apr 2021
Posts: 1,935
Likes: 1,127
From: Peoria, AZ
2023 C6 of the Year Finalist - Modified
I unplugged mine (on the steering column), then reconnected and put a zip tie around the sensor and pulled it tight, and it's been fine for nearly 2 years. That did it for me.....
