When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Got the parts from CIANCI USA. The parts need just a little smoothing/finishing out but no issues. I did a little extra shopping around, so that when one of the pieces gets dinged, no worries.
I guess there is no reason to think it wouldn't look great on interior pieces, right?
Looks OK at best, as long as you don't have any real carbon fiber to compare it to. I've done some pieces in my Zr1 but they look cheap compared to my steering wheel which is real. Hydrocarbon actually looks better.
Looks OK at best, as long as you don't have any real carbon fiber to compare it to. I've done some pieces in my Zr1 but they look cheap compared to my steering wheel which is real. Hydrocarbon actually looks better.
That's why you put the vinyl on the outside and the real stuff on the inside.
Looks great and the wrap will make it durable. I could not bring myself to spend the money on the real stuff when I have seen how it looks after several thousand miles, but this is definately a route I will follow.
04-23-2011, 05:05 PM
Really Nice .. I was thinking to go with this same path ... but was unsure how the outcome would be. 
