[Z06] 2011 Carbon Edition check in
#721
Le Mans Master
The following 2 users liked this post by Dr.Ron:
sam90lx (06-05-2016),
SteveDoten (11-14-2016)
#731
Advanced
I do not know but I would assume more then 10000 and then if you try to resell it at all it might loose value due to a respray
#732
5th Gear
Member Since: Feb 2007
Location: Fort Collins CO
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Supersonic Blue #101 Fort Collins, CO
Hi there, I have not been on this forum for appx 4 or 5 years. I have #101 in Fort Collins CO, and I am looking for brake pads for the 15.5" ceramic rotors. Does anyone have a good place to shop other than their local Chevy dealer who wants $1800 for front and rears? THanks.
#733
Le Mans Master
Hi there, I have not been on this forum for appx 4 or 5 years. I have #101 in Fort Collins CO, and I am looking for brake pads for the 15.5" ceramic rotors. Does anyone have a good place to shop other than their local Chevy dealer who wants $1800 for front and rears? THanks.
I am curious, how many miles on the car? Unless it was tracked heavily, it wouldn't be typical for them to need replacement for low to moderate street miles.
#734
Burning Brakes
Hi there, I have not been on this forum for appx 4 or 5 years. I have #101 in Fort Collins CO, and I am looking for brake pads for the 15.5" ceramic rotors. Does anyone have a good place to shop other than their local Chevy dealer who wants $1800 for front and rears? THanks.
171-1010 and 171-1009 are the part numbers. Stock pads are the way to go unless you are doing a lot of tracking then you may prefer something else.
#735
Racer
I just signed the papers for #109 a SSB with about 10000 miles on it. I'm getting my list of mods together that I want to do on the car and I've seen that the Halltech intakes will not fit on these cars because the radiator deflector shield is from the ZR1 and it causes clearance issues with the filter. Has anyone come across this problem? And does anyone have any idea what the part # for the Z06 shield is?
Thanks!
Ryan
Thanks!
Ryan
Last edited by RyanT; 08-01-2016 at 10:44 AM.
#736
Safety Car
Member Since: Aug 2009
Location: Chester County Pennsylvania
Posts: 4,995
Received 793 Likes
on
537 Posts
2020 C5 of the Year Finalist - Unmodified
I just signed the papers for #109 a SSB with about 10000 miles on it. I'm getting my list of mods together that I want to do on the car and I've seen that the Halltech intakes will not fit on these cars because the radiator deflector shield is from the ZR1 and it causes clearance issues with the filter. Has anyone come across this problem? And does anyone have any idea what the part # for the Z06 shield is?
Thanks!
Ryan
Thanks!
Ryan
#737
Racer
#739
Le Mans Master
I just signed the papers for #109 a SSB with about 10000 miles on it. I'm getting my list of mods together that I want to do on the car and I've seen that the Halltech intakes will not fit on these cars because the radiator deflector shield is from the ZR1 and it causes clearance issues with the filter. Has anyone come across this problem? And does anyone have any idea what the part # for the Z06 shield is?
Thanks!
Ryan
Thanks!
Ryan
And WELCOME FELLOW CE BROTHER!