[Z06] Help error code P0101
Thread Starter
Heel & Toe
Joined: Nov 2011
Posts: 23
Likes: 0
Help error code P0101
I ask you help, I have a Z06 with vararam installed, if it exceeds 140 km / h of the light comes on 'and I wrote esp traction system maintenance. I read the ECU and tells me error p0101. Concerning the mass of air. Can anyone tell me what solution I can take? I have already cleaned the airflow meter.
Tech Contributor
Joined: Oct 1999
Posts: 41,058
Likes: 9,821
From: Charlotte, NC (formerly Endicott, NY)
Check for an air leak. It may not be a very large leak. Also check the MAF wiring and make sure there aren't any shorts between the MAF wiring and the IAT wiring. Are you getting proper coolant temp readings? If the coolant temp sensor is stuck that could cause the ECM to miscalculate the the expected air flow. Same with the IAT.
Check the Diagnostic Hints in the attached word file.
Bill
Check the Diagnostic Hints in the attached word file.
Bill
Former Vendor
Joined: Aug 2001
Posts: 5,798
Likes: 50
From: Dallas & Chicago TX & IL
I ask you help, I have a Z06 with vararam installed, if it exceeds 140 km / h of the light comes on 'and I wrote esp traction system maintenance. I read the ECU and tells me error p0101. Concerning the mass of air. Can anyone tell me what solution I can take? I have already cleaned the airflow meter.
Thanks,
Carlos
