[Z06] Z06 Jack puck help

Reply Subscribe

Thread Tools

Search this Thread

11-18-2012, 04:13 PM

#21

Bill Dearborn

Tech Contributor

Member Since: Oct 1999

Location: Charlotte, NC (formerly Endicott, NY)

Posts: 40,094

Likes: 8

Received 8,928 Likes on 5,333 Posts

Quote:

Originally Posted by Viz

Resurrecting an old thread, I know....

I use these pads to change customers tires on cars with pinch welds. Turning them upside down (for a flat mating surface) works on other cars.

http://protechproducts.com/index.php...ory&path=35_37

Question: any reason these would not work (upside down) on a Z06, purely to put the car on dollys, one wheel at a time?

Viz

You could use those. Putting them upside down wouldn't make a difference. GM only recommends using the pucks in the rear shipping slots. A piece of 2x4 works well also. Use of the pucks was mandatory on the C5 since the rocker panel only had a small opening at the rear shipping slot but you could get away without anything on a C6 as long as your jack pad was the correct size and depth.

Bill

Reply Like

Reply Subscribe