[Z06] Lethal racing enforcer cam for the win!
#1
Advanced
Thread Starter
Lethal racing enforcer cam for the win! (Idle vid added)
I dropped my stock 2006 Z06 (with the exception of the muffler mod) off at Lethal Racing for some upgrades. Just picked it up today and Wow what a difference. Mods are as follows:
Enforcer Cam
Stainless Works 2" headers
Milled heads
Stainless steel exhaust valves
Ported TB and Intake
Vararam CAI
And here are the results:
THANKS TO ALL THE GUYS AT LETHAL RACING!
Enforcer Cam
Stainless Works 2" headers
Milled heads
Stainless steel exhaust valves
Ported TB and Intake
Vararam CAI
And here are the results:
THANKS TO ALL THE GUYS AT LETHAL RACING!
Last edited by ssracer337; 02-24-2013 at 11:50 PM. Reason: Title
#2
Melting Slicks
I dropped my stock 2006 Z06 (with the exception of the muffler mod) off at Lethal Racing for some upgrades. Just picked it up today and Wow what a difference. Mods are as follows:
Enforcer Cam
Stainless Works 2" headers
Milled heads
Stainless steel exhaust valves
Ported TB and Intake
Vararam CAI
And here are the results:
THANKS TO ALL THE GUYS AT LETHAL RACING!
Enforcer Cam
Stainless Works 2" headers
Milled heads
Stainless steel exhaust valves
Ported TB and Intake
Vararam CAI
And here are the results:
THANKS TO ALL THE GUYS AT LETHAL RACING!
#3
Advanced
Thread Starter
Has minimal surge at RPM below 1500. But very streetable compared to other big cam setups I have driven. Drove approx. 120 miles home and was able to leave it in 6th gear on the highway with no drama.
#7
Advanced
Thread Starter
Nyerby here is a link describing the cam specs
http://forums.corvetteforum.com/c6-z...dle-graphs-ins
http://forums.corvetteforum.com/c6-z...dle-graphs-ins
Last edited by ssracer337; 02-24-2013 at 09:09 AM. Reason: Correct message
#8
Advanced
Thread Starter
You may like their Phantom cam then. A little milder, but still has great power and torque curve.
Last edited by ssracer337; 02-24-2013 at 09:18 AM. Reason: Typo
#9
Advanced
Thread Starter
#11
Advanced
Thread Starter
#16
Advanced
Thread Starter
With the exhaust flaps closed you can still hear the cam but ALOT of the volume goes away, especially inside the car. At hwy speed the interior volume is close to stock. I feel like it is a "best of both worlds setup".
#18
I agree, best of both worlds. Nice cammed sound when open and reasonably close to stock with them closed. I hope mine ends up the same way.
#19
Instructor
Member Since: Oct 2011
Location: Maurice La
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Sound great, Shawn is the best tuner in our area hands down. I,m running the same compression as you with the exception of methanol injection and Shawn got 618rwhp/595rwtq out of it, I made 588rwhp without meth, I also have ported fast intake and nick williams 102TB but my car drives great. Enjoy it!!