When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
2008 Z06 with stock OEM front splitter (useless)
We Autocross a lot, and some track days.
Autocross can hit up to 130 kmh and then into a sweeping curve,
so I'd like to consider getting more downforce in the front,
to make it faster through the corners.
All are good choices. Katech and LG are the better built, but the RPI is a good piece as well. I run the ZR1 style RPI splitter with the splitter brace that I installed behind the front bumper cover. Car is a road race car. I was noticing flexing, deformation of the splitter at speed from some pictures/video and so I installed the front splitter brace last year and it definitely helped at 150mph.
I also have an RPI splitter, but mine is the ZRAL-1 version that comes up in the middle. I installed the brace inside the front bumper too, got the brace from C7 Carbon.
I also have an RPI splitter, but mine is the ZRAL-1 version that comes up in the middle. I installed the brace inside the front bumper too, got the brace from C7 Carbon.
What hood is that??
I have an RIP splitter and brace. Splits pretty good!
I thought someone made an extended version of the ZR1 style splitter? Can't seem to find it though.
C7 Carbon makes extended side skirts, and a few places make extended rear spoiler. But never heard of extended front splitter. The ZRAL-1 is the only variant that I'm aware of from the standard ZR1 style.
C7 Carbon makes extended side skirts, and a few places make extended rear spoiler. But never heard of extended front splitter. The ZRAL-1 is the only variant that I'm aware of from the standard ZR1 style.
OK, and then what about the re-inforcing bracket?
Do I need it ?
If so, from who ?
Those are all basically the same. I found C7 carbon to be the least expensive at the time I bought mine. And it was in stock too. You only need it if you plan to be running 100 MPH plus on a regular basis. Keeps the nose stiff, and not pulling down towards the pavement.
Im in the same exact position, it seems acs one is the most extended vs a regular zr1? I may just be looking at it differently too. I would like the most aggressive one I can buy but spending 2k+ just on a splitter seems alittle ridiculous imo
OK, I have decided, and bought... eBay of course....
lowest pricing for what I want/need... mainly autocross (some fast courses too),
and a few track days.
Heres the eBay splitter I bought
www dot ebay dot com/itm/331242091426
and heres the eBay support bracket for the grill area
www dot ebay dot com/itm/281915627848
Possibly they aren't as good as some of the other vendors,
but if it is going to be subjected to a few speed bumps, driveway dips, etc.,
I'd rather bang up this one than a very expensive one.
07-26-2017, 08:05 PM
Which ZR1 Splitter for my Z06 ?
