[Z06] Valve guide repair documentation
#1
Premium Supporting Vendor
Thread Starter
Valve guide repair documentation
Another C6 Z06 went through our shop for valve guide repair. I always post the build and the measurements but since this one was a repair only the thread is not as exciting. Here are the measurements. As you can see some of the intakes were pretty bad.
The following users liked this post:
dmartens (09-25-2017)
#3
Premium Supporting Vendor
Thread Starter
#4
Team Owner
Out of curiosity, is it a 2011+ car?
#6
Race Director
Interesting that all the exhaust valves are in spec. My 09Z with 46K miles had all exhaust and 6 of 8 intakes bad, max was around.0084
Jason, in a couple of weeks I'll be swapping out my AFE/Pfadt 1 7/8" Tri-Ys for ARH 2". I'll have a thread on the dyno results change. My K501 with MSD and other stuff was 489Tq at 5300 rpm and 602 RWHP at 7100 RPM. I am hoping for 520 tq with 600 hp at 6700 rpm from the change.
Jason, in a couple of weeks I'll be swapping out my AFE/Pfadt 1 7/8" Tri-Ys for ARH 2". I'll have a thread on the dyno results change. My K501 with MSD and other stuff was 489Tq at 5300 rpm and 602 RWHP at 7100 RPM. I am hoping for 520 tq with 600 hp at 6700 rpm from the change.
Last edited by AzDave47; 09-25-2017 at 04:07 PM.