When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Those Forgeline VX1Rs look pretty similar to the Signature SV104s. "BAAD LS2" has the SV104s on his JSB ZR1. He's also running a 19 F/R setup
I'm guessing your car will look fairly similar to the pics I've attached below of BAAD LS2's ride.. and that's a good thing!
Yes, they are _similar_ and yes his car looks great. I've seen his car in person and online. The spokes of the wheels are similar, but the center of the wheel is a completely different design. Decided on Forgelines for me.
You have way more self control than I would ever have.
It is nice to see such a small amount of weight to balance but it is odd to see weight on both sides of the wheel.
I am getting the front end aligned tomorrow, and therefore am waiting to put these on until the alignment is done. Then Saturday, I have two weddings to attend. LOL
Just a very busy few days for me...otherwise, they would be on the car already.
I am getting the front end aligned tomorrow, and therefore am waiting to put these on until the alignment is done. Then Saturday, I have two weddings to attend. LOL
Just a very busy few days for me...otherwise, they would be on the car already.
I'm sure I can come up with more than 1 reason why you can't attend those weddings should you need.
I'm sure I can come up with more than 1 reason why you can't attend those weddings should you need.
Please post pics once you get them mounted up!!
I love my wife too much... but yes, I'd be happy to skip 'em, too. LOL
If nothing crazy comes up tomorrow afternoon, I will get it done tomorrow after the alignment is done, I get home, and give the brakes some time to cool.
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'22-'23
Originally Posted by phils C5 vette
Im so tempted on the 2.6 pulley, but im trying to hold out.
I've been fighting the urge for years and have been back and forth, so far my car is stock. Just think how few un modded C6 ZR1's there will be soon, but I'm still tempted.
Low light pics... I got them on as soon as I had time. Took my time because I wanted to be extra careful with the brakes... didn't use the protectors when taking them off, but did use them when putting the wheels back on.
Very pleased with the finished product. Thank you, Gerry, at CW4L!!
Also, as a side note for performance folks... saved ~10lbs per corner with the Forgelines vs. the OEM wheel/tire setup. I don't know the difference in the weight of the tires, but I don't see how there would be any significant weight savings going with the wider R888R compared to OEM tires, but maybe the RFs are heavier.
Side by side, the wheels look significantly different... I am certain. Maybe not at first glance, however. But the Signature wheels have more concavity and the FL's have more rakish/edgy lines.
Side by side, the wheels look significantly different... I am certain. Maybe not at first glance, however. But the Signature wheels have more concavity and the FL's have more rakish/edgy lines.
True. Both look great. You're riding stock height right?
01-04-2018, 10:42 AM
you'll need to take them out on a spin...
