Best tuner in the Midwest
04-03-2018, 11:22 AM
#1
Pro
Thread Starter
Best tuner in the Midwest
Im kicking around the idea of getting my car retuned and do not know who does good work. I am located in West Michigan but willing to drive a reasonable distance to make sure it’s done right. I have a HCI z06 with a McLeod twin disk clutch and several bolt ons. I’m looking for drive ability and good power across the board but, not a 100% max effort tune. Getting rid of a bit more or the lope and shaking would be great. It already has fairly good street manners but if I can get it in the hands of someone who really knows their stuff I think they could get it close to very close to stock drive ability.
04-03-2018, 11:28 AM
#2
Melting Slicks
i just had mike norris tune mine, going back friday for a little adjustment but overall night and day diff from when it went in
hci 102/102 full ex c6z
made 589/540
tuners that i know of are as follows in indiana
lingenfelter
mike norris motorsports
david griffin
pro dyno tech (ron)
johnson tuning @ fathouse fabrications
short tuning in western KY
you may give rpm transmissions a call, they have some other guys available too
with this info ill also tell you that EVERY person has a good and a bad experience with a tuner so this will open up a can of worms searching for the "BEST" tuner because that is all opinion
gool luck
hci 102/102 full ex c6z
made 589/540
tuners that i know of are as follows in indiana
lingenfelter
mike norris motorsports
david griffin
pro dyno tech (ron)
johnson tuning @ fathouse fabrications
short tuning in western KY
you may give rpm transmissions a call, they have some other guys available too
with this info ill also tell you that EVERY person has a good and a bad experience with a tuner so this will open up a can of worms searching for the "BEST" tuner because that is all opinion
gool luck
Last edited by ~STOLEN~; 04-03-2018 at 11:30 AM.
The following users liked this post:
~STOLEN~ (04-03-2018)
04-03-2018, 12:35 PM
#4
Pro
Thread Starter
i just had mike norris tune mine, going back friday for a little adjustment but overall night and day diff from when it went in
hci 102/102 full ex c6z
made 589/540
tuners that i know of are as follows in indiana
lingenfelter
mike norris motorsports
david griffin
pro dyno tech (ron)
johnson tuning @ fathouse fabrications
short tuning in western KY
you may give rpm transmissions a call, they have some other guys available too
with this info ill also tell you that EVERY person has a good and a bad experience with a tuner so this will open up a can of worms searching for the "BEST" tuner because that is all opinion
gool luck
hci 102/102 full ex c6z
made 589/540
tuners that i know of are as follows in indiana
lingenfelter
mike norris motorsports
david griffin
pro dyno tech (ron)
johnson tuning @ fathouse fabrications
short tuning in western KY
you may give rpm transmissions a call, they have some other guys available too
with this info ill also tell you that EVERY person has a good and a bad experience with a tuner so this will open up a can of worms searching for the "BEST" tuner because that is all opinion
gool luck
04-03-2018, 12:41 PM
#5
Instructor
Im kicking around the idea of getting my car retuned and do not know who does good work. I am located in West Michigan but willing to drive a reasonable distance to make sure it’s done right. I have a HCI z06 with a McLeod twin disk clutch and several bolt ons. I’m looking for drive ability and good power across the board but, not a 100% max effort tune. Getting rid of a bit more or the lope and shaking would be great. It already has fairly good street manners but if I can get it in the hands of someone who really knows their stuff I think they could get it close to very close to stock drive ability.
I had a good experience with Nickey Performance ion the Chicago Suburbs
04-03-2018, 01:26 PM
#7
Pro
Thread Starter
04-03-2018, 10:26 PM
#8
Intermediate
Im kicking around the idea of getting my car retuned and do not know who does good work. I am located in West Michigan but willing to drive a reasonable distance to make sure it’s done right. I have a HCI z06 with a McLeod twin disk clutch and several bolt ons. I’m looking for drive ability and good power across the board but, not a 100% max effort tune. Getting rid of a bit more or the lope and shaking would be great. It already has fairly good street manners but if I can get it in the hands of someone who really knows their stuff I think they could get it close to very close to stock drive ability.
04-04-2018, 09:56 AM
#15
Pro
Thread Starter
I’m very familiar with tuning diesels and know all the top tuners off the top of my head. I was just trying to see if there was one, or a few that really stood out and like in the diesel world.
04-04-2018, 04:04 PM
#17
Burning Brakes
I'm in West Michigan too. Good luck finding a good tuner. I'm so glad I do my own now! Greg and Dr.phil are supposed to be really good if you can get them to do it. Alternative is good but I only have mustang experience with them. Most tuners will not give your tune the attention you probably want especially for the price you probably want to pay. A great tune is very time consuming.
04-04-2018, 07:47 PM
#20
I'm in west Michigan as well. Good luck finding someone. I know a guy in kzoo who has done some bad *** CTS-v's but he mostly does Big turbo import stuff. I did a remote tune from kohle at AHP, but with adding go fast goodies this winter I need a new tuner...