Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

The C6 Z06 Fast List

Thread Tools
 
Search this Thread
 
Old 03-24-2020, 11:58 AM
  #61  
Halltech
Supporting Vendor
 
Halltech's Avatar
 
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes on 313 Posts
St. Jude Donor '09

Default

Originally Posted by GARY2004Z06
Congrats Rob.
Amazing pass.
I'll update your pass later tonight.
(I truly believe that you will go even lower. Your launch was fantastic but I can see a better 60'. You should see a mid 9.20 this year.)
Great driving.
Just saw this. Congratulations on a awesome pass.
__________________

"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600

For service email:
orders@halltechsystems.com

www.halltechsystems.com

















The following users liked this post:
RobGOV-DCZ (03-24-2020)
Old 03-24-2020, 12:00 PM
  #62  
RobGOV-DCZ
Pro
 
RobGOV-DCZ's Avatar
 
Member Since: May 2016
Location: Dallas
Posts: 518
Received 150 Likes on 89 Posts
Default

Originally Posted by Halltech
Just saw this. Congratulations on a awesome pass.
thank you sir. Your CF112 works well for me
Old 03-24-2020, 12:13 PM
  #63  
Halltech
Supporting Vendor
 
Halltech's Avatar
 
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes on 313 Posts
St. Jude Donor '09

Default

Originally Posted by RobGOV-DCZ
thank you sir. Your CF112 works well for me
Thanks Rob. What is your full name? I would like to post the youtube pass on our website, if ok with you.

Jim Hall
Old 03-24-2020, 12:15 PM
  #64  
RobGOV-DCZ
Pro
 
RobGOV-DCZ's Avatar
 
Member Since: May 2016
Location: Dallas
Posts: 518
Received 150 Likes on 89 Posts
Default

Originally Posted by Halltech
Thanks Rob. What is your full name? I would like to post the youtube pass on our website, if ok with you.

Jim Hall
Yes no problem sir. That would be great!

Robert Smith (not to be confused with Rob Smith the owner of RPS clutches haha)
Old 03-24-2020, 12:19 PM
  #65  
Halltech
Supporting Vendor
 
Halltech's Avatar
 
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes on 313 Posts
St. Jude Donor '09

Default

Originally Posted by RobGOV-DCZ
Yes no problem sir. That would be great!

Robert Smith (not to be confused with Rob Smith the owner of RPS clutches haha)
Done: https://www.halltechsystems.com/default.asp
Old 03-24-2020, 12:21 PM
  #66  
RobGOV-DCZ
Pro
 
RobGOV-DCZ's Avatar
 
Member Since: May 2016
Location: Dallas
Posts: 518
Received 150 Likes on 89 Posts
Default

Originally Posted by Halltech
Appreciate the share sir.
Old 10-13-2020, 02:31 PM
  #67  
Eric Fischer
Melting Slicks
 
Eric Fischer's Avatar
 
Member Since: Oct 2000
Location: Freehold, NJ
Posts: 2,720
Received 23 Likes on 21 Posts

Default

Here is my submission for Internal Engine Mods plus Bolt-Ons

Year of the Z06: 2007

Tires used on the pass: Hoosier 295/50/16 Drag Radial on CCWs
Performance Mods (if any): Cam Motion LS7 Stage 2 Camshaft (228/240-118+4), Fixed heads, AFR headers with cats. Stock everything else
Category submitted for: Internal Engine Mods plus Bolt-Ons
60'.............1.474
330'...........4.453
660'...........6.843
660’ mph...102.70
1000'..........8.889
1320'..........10.732
1320’ mph…130.42
Name of the track: Atco
Date of pass: October 9, 2020
Weather conditions: (include Density Altitude, if known): T=58F RH=71% BP= 30.18mm DA= -172ft


Image of complete Time Slip:



Link to Corvette Forum thread containing report: https://www.corvetteforum.com/forums...post1602335416

Link to Video: N/A

Last edited by Eric Fischer; 10-14-2020 at 10:43 AM. Reason: corrected 1/8 mi speed and time
Old 10-14-2020, 09:11 PM
  #68  
GARY2004Z06
Le Mans Master
Support Corvetteforum!
Thread Starter
 
GARY2004Z06's Avatar
 
Member Since: Nov 2005
Location: Kendall Park NJ
Posts: 6,964
Likes: 0
Received 335 Likes on 247 Posts

Default

Originally Posted by Eric Fischer
Here is my submission for Internal Engine Mods plus Bolt-Ons

Year of the Z06: 2007

Tires used on the pass: Hoosier 295/50/16 Drag Radial on CCWs
Performance Mods (if any): Cam Motion LS7 Stage 2 Camshaft (228/240-118+4), Fixed heads, AFR headers with cats. Stock everything else
Category submitted for: Internal Engine Mods plus Bolt-Ons
60'.............1.474
330'...........4.453
660'...........6.843
660’ mph...102.70
1000'..........8.889
1320'..........10.732
1320’ mph…130.42
Name of the track: Atco
Date of pass: October 9, 2020
Weather conditions: (include Density Altitude, if known): T=58F RH=71% BP= 30.18mm DA= -172ft


Image of complete Time Slip:



Link to Corvette Forum thread containing report: https://www.corvetteforum.com/forums...post1602335416

Link to Video: N/A
Congrats.
Updated.
Old 10-15-2020, 12:10 PM
  #69  
Sébast19X
Drifting
 
Sébast19X's Avatar
 
Member Since: Sep 2007
Location: Baie-Comeau Quebec
Posts: 1,473
Received 194 Likes on 110 Posts

Default LS7 NEW PB and Finally 8 sec N/A 427 c.i M6

Hi this is my submission for the fastlist

This is the First N/A 427 LS7 C6 Z06 M6 with 17’’ & 15" Drag Radial on Corvette Forum to record a 9.7x, 9.6x, 9.5x, 9.4x, 9.3x, 9.2x, 9.1x, 9.0x, 8.9x

Year of the Z06: 2008
Tire used on the pass: Hoosier DR2 295-55-15, Front skinnies, Bogart custom lightweight 15x11 wheels
Performance Mods (if any): Vararam SC1R, ARH, AHP ported MSD 102/102, AHP CNC LS7 heads, ID1050X injectors, Fore twin walbro 525 pump, RPS BC2 clutch, Mezier EWP, ATI underdrive, Custom Iceman 4.0 cam, MSD 8.5mm, MSD LS 2 step, S.I.R.P. Tune, 160 stats, Custom TR6060 ratio, Motive 3.90 rear end, C6Z06 rear axle, QA1 DA shocks, Weight 2675lbs dry no fuel no driver, , Stock LS7 block Darton sleeved with stock LS7 rotating, ARP main & Heads studs, 3800 RPM launch.

Category submitted for: Bolt-On with internal engine mods

60'............. 1.239
330'........... 3.704
660'........... 5.738
660’ mph.... 119.71
1000'.......... 7.507
1320'.......... 8.993
1320’ mph… 151.84

Name of the track: Napierville Dragway
Date of pass: 11 October 2020
Weather conditions: (include Density Altitude, if known):Sunny & 8 mph headwind DA -540’
Image of complete Time Slip:

Record run



Videos:



I will made a post soon with a description of everything.

Last edited by Sébast19X; 10-15-2020 at 08:42 PM.
The following 6 users liked this post by Sébast19X:
18JamesS (11-23-2020), American Heritage (10-19-2020), HotRod Junkie (11-02-2020), Last 1 (10-17-2020), RobGOV-DCZ (10-15-2020), tdeweese (10-17-2020) and 1 others liked this post. (Show less...)
Old 10-15-2020, 12:15 PM
  #70  
RobGOV-DCZ
Pro
 
RobGOV-DCZ's Avatar
 
Member Since: May 2016
Location: Dallas
Posts: 518
Received 150 Likes on 89 Posts
Default

[QUOTE=Sébast19X;1602345339]Hi this is my submission for the fastlist



congrats my friend. Alot of hard work and dedication paid off.
The following users liked this post:
Sébast19X (10-15-2020)
Old 10-16-2020, 02:20 PM
  #71  
GARY2004Z06
Le Mans Master
Support Corvetteforum!
Thread Starter
 
GARY2004Z06's Avatar
 
Member Since: Nov 2005
Location: Kendall Park NJ
Posts: 6,964
Likes: 0
Received 335 Likes on 247 Posts

Default

Originally Posted by Sébast19X
Hi this is my submission for the fastlist

This is the First N/A 427 LS7 C6 Z06 M6 with 17’’ & 15" Drag Radial on Corvette Forum to record a 9.7x, 9.6x, 9.5x, 9.4x, 9.3x, 9.2x, 9.1x, 9.0x, 8.9x

Year of the Z06: 2008
Tire used on the pass: Hoosier DR2 295-55-15, Front skinnies, Bogart custom lightweight 15x11 wheels
Performance Mods (if any): Vararam SC1R, ARH, AHP ported MSD 102/102, AHP CNC LS7 heads, ID1050X injectors, Fore twin walbro 525 pump, RPS BC2 clutch, Mezier EWP, ATI underdrive, Custom Iceman 4.0 cam, MSD 8.5mm, MSD LS 2 step, S.I.R.P. Tune, 160 stats, Custom TR6060 ratio, Motive 3.90 rear end, C6Z06 rear axle, QA1 DA shocks, Weight 2675lbs dry no fuel no driver, , Stock LS7 block Darton sleeved with stock LS7 rotating, ARP main & Heads studs, 3800 RPM launch.

Category submitted for: Bolt-On with internal engine mods

60'............. 1.239
330'........... 3.704
660'........... 5.738
660’ mph.... 119.71
1000'.......... 7.507
1320'.......... 8.993
1320’ mph… 151.84

Name of the track: Napierville Dragway
Date of pass: 11 October 2020
Weather conditions: (include Density Altitude, if known):Sunny & 8 mph headwind DA -540’
Image of complete Time Slip:

Record run



Videos:

https://youtu.be/Wtx0RqyxiEE

https://youtu.be/dD5I1kcWmYU

I will made a post soon with a description of everything.
Tres, tres bien.
Congrats.
Job well done.
Updated.
The following 2 users liked this post by GARY2004Z06:
Sébast19X (10-16-2020), socialdfan (05-10-2021)
Old 10-16-2020, 03:46 PM
  #72  
Premiumspeed
Racer
 
Premiumspeed's Avatar
 
Member Since: Jun 2015
Location: Las Cruces, New Mexico
Posts: 376
Received 47 Likes on 41 Posts
Default

That's awesome, glad to see a dip into the 8's.
The following 2 users liked this post by Premiumspeed:
RobGOV-DCZ (10-16-2020), Sébast19X (10-17-2020)
Old 10-17-2020, 01:26 PM
  #73  
TNTZ06
Instructor
 
TNTZ06's Avatar
 
Member Since: Sep 2007
Posts: 191
Received 26 Likes on 15 Posts

Default Well done!!!



Just awesome Seb! I have been watching your accomplishments in that car since you joined the forums, and that run is an extraordinary achievement.
The attention to detail is what sets you apart. It is at a minimum like that of the work that goes into a record setting NHRA super stocker, in terms of the sheer work and thought processes involved.
Nobody else even close my friend. Congrats!
The following users liked this post:
Sébast19X (10-17-2020)
Old 10-19-2020, 03:52 PM
  #74  
American Heritage
Supporting Vendor
 
American Heritage's Avatar
 
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,817
Received 1,012 Likes on 533 Posts

Default

Originally Posted by Sébast19X
Hi this is my submission for the fastlist

This is the First N/A 427 LS7 C6 Z06 M6 with 17’’ & 15" Drag Radial on Corvette Forum to record a 9.7x, 9.6x, 9.5x, 9.4x, 9.3x, 9.2x, 9.1x, 9.0x, 8.9x

Year of the Z06: 2008
Tire used on the pass: Hoosier DR2 295-55-15, Front skinnies, Bogart custom lightweight 15x11 wheels
Performance Mods (if any): Vararam SC1R, ARH, AHP ported MSD 102/102, AHP CNC LS7 heads, ID1050X injectors, Fore twin walbro 525 pump, RPS BC2 clutch, Mezier EWP, ATI underdrive, Custom Iceman 4.0 cam, MSD 8.5mm, MSD LS 2 step, S.I.R.P. Tune, 160 stats, Custom TR6060 ratio, Motive 3.90 rear end, C6Z06 rear axle, QA1 DA shocks, Weight 2675lbs dry no fuel no driver, , Stock LS7 block Darton sleeved with stock LS7 rotating, ARP main & Heads studs, 3800 RPM launch.

Category submitted for: Bolt-On with internal engine mods

60'............. 1.239
330'........... 3.704
660'........... 5.738
660’ mph.... 119.71
1000'.......... 7.507
1320'.......... 8.993
1320’ mph… 151.84

Name of the track: Napierville Dragway
Date of pass: 11 October 2020
Weather conditions: (include Density Altitude, if known):Sunny & 8 mph headwind DA -540’
Image of complete Time Slip:

Record run

I will made a post soon with a description of everything.
Big Congratulations Seb!!!
You deserve it sir! Amazing work and an amazing Run!!!

https://americanheritageperformance.com/
Old 10-20-2020, 09:25 AM
  #75  
Eric Fischer
Melting Slicks
 
Eric Fischer's Avatar
 
Member Since: Oct 2000
Location: Freehold, NJ
Posts: 2,720
Received 23 Likes on 21 Posts

Default

Updates to my submission for Internal Engine Mods plus Bolt-Ons. No changes since last time other than more seat time and and better DA (good air but not the best atm pressure). I continue to be impressed by these cars. In my fifth time to the track with the car, I have been rewarded with a 10.40 @ 134 in a car that drives like stock and gets 24 MPG on the trip to the track. The C6Z is the performance bargain of the decade.

Year of the Z06: 2007

Tires used on the pass: Hoosier 295/50/16 Drag Radial on CCWs
Performance Mods (if any): Cam Motion LS7 Stage 2 Camshaft (228/240-118+4), Fixed heads, AFR headers with cats. Stock everything else
Category submitted for: Internal Engine Mods plus Bolt-Ons
60'.............1.518
330'...........4.371
660'...........6.706
660’ mph...105.54
1000'..........8.703
1320'..........10.400
1320’ mph…133.82
Name of the track: Atco
Date of pass: November 29, 2020
Weather conditions: (include Density Altitude, if known): T=55F RH=38% BP= 30.14mm DA= -392 ft


Image of complete Time Slip:

timeslip


Link to Corvette Forum thread containing report: https://www.corvetteforum.com/forums...post1602369220

Link to Video:


Last edited by Eric Fischer; 12-01-2020 at 12:28 PM.
The following users liked this post:
HotRod Junkie (11-02-2020)
Old 10-20-2020, 08:59 PM
  #76  
GARY2004Z06
Le Mans Master
Support Corvetteforum!
Thread Starter
 
GARY2004Z06's Avatar
 
Member Since: Nov 2005
Location: Kendall Park NJ
Posts: 6,964
Likes: 0
Received 335 Likes on 247 Posts

Default

Originally Posted by Eric Fischer
Updates to my submission for Internal Engine Mods plus Bolt-Ons. No changes since last time other than more seat time and although the DA was higher the air was better (higher BP and less moisture). I continue to be impressed by these cars. I have only had 5 clean passes on the car and I have been rewarded with a 10.55 @ 131 in a car that idles like stock and gets 24 MPG on the trip to the track. The C6Z is the performance bargain of the decade.

Year of the Z06: 2007

Tires used on the pass: Hoosier 295/50/16 Drag Radial on CCWs
Performance Mods (if any): Cam Motion LS7 Stage 2 Camshaft (228/240-118+4), Fixed heads, AFR headers with cats. Stock everything else
Category submitted for: Internal Engine Mods plus Bolt-Ons
60'.............1.582
330'...........4.485
660'...........6.837
660’ mph...104.32
1000'..........8.851
1320'..........10.556
1320’ mph…131.11
Name of the track: Atco
Date of pass: October 18, 2020
Weather conditions: (include Density Altitude, if known): T=65F RH=58% BP= 30.40mm DA= +40ft


Image of complete Time Slip:




Link to Corvette Forum thread containing report: https://www.corvetteforum.com/forums...post1602335416

Link to Video: N/A[
Updated.
Old 12-05-2020, 07:27 PM
  #77  
Farmvette
Instructor
 
Farmvette's Avatar
 
Member Since: Nov 2019
Location: Farmington, MI
Posts: 202
Received 54 Likes on 39 Posts
Default

Can we add 1/2 mile and / or 1 mile in here as well?

Get notified of new replies

To The C6 Z06 Fast List

Old 12-05-2020, 07:30 PM
  #78  
RobGOV-DCZ
Pro
 
RobGOV-DCZ's Avatar
 
Member Since: May 2016
Location: Dallas
Posts: 518
Received 150 Likes on 89 Posts
Default

Originally Posted by Farmvette
Can we add 1/2 mile and / or 1 mile in here as well?
No way
The following users liked this post:
TRSCobra (12-06-2020)
Old 12-06-2020, 04:02 PM
  #79  
Farmvette
Instructor
 
Farmvette's Avatar
 
Member Since: Nov 2019
Location: Farmington, MI
Posts: 202
Received 54 Likes on 39 Posts
Default

Originally Posted by RobGOV-DCZ
No way
Well, a concise response I suppose. Care to clarify? - the ZR1 sticky has both 1/4 mile and mile together.

Old 05-15-2021, 02:00 PM
  #80  
TRSCobra
Drifting

Support Corvetteforum!
 
TRSCobra's Avatar
 
Member Since: Jul 2007
Location: Washington
Posts: 1,319
Received 239 Likes on 163 Posts

Default

Year of the Z06: 2006
Tires used on the pass: 26x10-15 Mickey stiff wall slicks
Performance Mods (if any): Stock bottom end LS7, stock heads and MSD intake ported by Greg Good, 12.1:1 compression, Greg Good/Pat G hydraulic roller cam, 1-7/8" ARH, Halltech MF108 CAI, NW112 TB, RPS BC2 clutch, RPM lvl 7 TR6060/Stage 4 diff w/3.90 gears, viking shocks, AMT monoball rear control arm bushings
Category submitted for: Internal engine mods plus bolt ons
60'.............1.433
330'...........4.070
660'...........6.272
660’ mph...111.47
1000'..........8.168
1320'..........9.750
1320’ mph…142.90
Name of the track: Pacific Raceways
Date of pass: 13 May, 2021
Weather conditions: (include Density Altitude, if known): 800' DA

The following users liked this post:
2MCHPWR (05-15-2021)


Quick Reply: The C6 Z06 Fast List



All times are GMT -4. The time now is 07:54 PM.