06 H/C/I Z06 forsale
#1
Racer
Thread Starter
06 H/C/I Z06 forsale
06 z06 with aprox 46k miles.
-WCCH Brodix br7 heads milled 0.015”
-3x3” long tubes no cats
-CHE precision rockers
-New valve seals
-New retainers
-Upgraded pushrods
-Billet adjustable timing set with the c5r chain
-Custom plumbed nitrous setup progressive control
-Nitrous outlet nitrous kit with 100 shot
-Tick master cylinder
-Tilton race slave cylinder
-Clutch bleeder for easy access tot he fluid
-Custom grind cam motion cam
-Dual springs
-Ported fast 102, NW 102 t - body
-Pfadt trans mounts and Henson motor mounts
-Halltech intake with beehive
-Pfadt 1 7/8 headers with OR
-Corsa catback
-Katech ls9x clutch with Tilton race slave and tick master
-Stage 2 trans
-Rpm stage 3 diff cryotreated and micro polished 4.10 gears
-Rebuilt torque tube
-Colman 2 piece rotors with hawk hps pads and steel brake lines
-Bilistein suspension
-ZR1 carbon fiber lip spoiler and side skirts
-CCW c14 wheels 18x13 18x10
-Sparco fighter seats
-Harness bar
-Impact 4 point belts
Car will come with stock seats and the sparco seats
I bought the car two years ago from a member here, Nate B. I have put less than two thousand miles on the car. Recently the car went in for a 100 progressive shot. Also done was head work, rockers, pushrods, billet adjustable timing set, timing chain, and the nitrous outlet kit. Car made 690/690 on a hub dyno. Made 599whp all motor. The tune and custom work was done by a shop called Quantum here in upstate NY. The car is crazy fast and needs to be driven with care.
The price is set at $40,000. No trades please
Car is located in Albany NY. Shipping is 100% on you.
serious inquires only please. email at ejtortorici@gmail.com and if you are really serious I will give you my phone number.
-WCCH Brodix br7 heads milled 0.015”
-3x3” long tubes no cats
-CHE precision rockers
-New valve seals
-New retainers
-Upgraded pushrods
-Billet adjustable timing set with the c5r chain
-Custom plumbed nitrous setup progressive control
-Nitrous outlet nitrous kit with 100 shot
-Tick master cylinder
-Tilton race slave cylinder
-Clutch bleeder for easy access tot he fluid
-Custom grind cam motion cam
-Dual springs
-Ported fast 102, NW 102 t - body
-Pfadt trans mounts and Henson motor mounts
-Halltech intake with beehive
-Pfadt 1 7/8 headers with OR
-Corsa catback
-Katech ls9x clutch with Tilton race slave and tick master
-Stage 2 trans
-Rpm stage 3 diff cryotreated and micro polished 4.10 gears
-Rebuilt torque tube
-Colman 2 piece rotors with hawk hps pads and steel brake lines
-Bilistein suspension
-ZR1 carbon fiber lip spoiler and side skirts
-CCW c14 wheels 18x13 18x10
-Sparco fighter seats
-Harness bar
-Impact 4 point belts
Car will come with stock seats and the sparco seats
I bought the car two years ago from a member here, Nate B. I have put less than two thousand miles on the car. Recently the car went in for a 100 progressive shot. Also done was head work, rockers, pushrods, billet adjustable timing set, timing chain, and the nitrous outlet kit. Car made 690/690 on a hub dyno. Made 599whp all motor. The tune and custom work was done by a shop called Quantum here in upstate NY. The car is crazy fast and needs to be driven with care.
The price is set at $40,000. No trades please
Car is located in Albany NY. Shipping is 100% on you.
serious inquires only please. email at ejtortorici@gmail.com and if you are really serious I will give you my phone number.
Last edited by deadbeatrec; 08-20-2016 at 06:05 PM.
#2
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
Nice car, GLWS!
The following users liked this post:
deadbeatrec (08-19-2016)
#3
Racer
Thread Starter
#5
Racer
Thread Starter
#13
Burning Brakes