WTB: C6
#1
C6
Hey all, I'm looking for a C6
Interior options don't really matter
Z51 would be a bonus but also not required.
It must be a clean title
It must be a manual
And it must stay under 80k miles
I'm located in Ohio, Let me know what you have. Thank you!
Interior options don't really matter
Z51 would be a bonus but also not required.
It must be a clean title
It must be a manual
And it must stay under 80k miles
I'm located in Ohio, Let me know what you have. Thank you!
#2
C7USA|C6USA|C2USA
Have you found a ‘vette you like yet? If not, I’m selling my ‘08 Z51 Convertible, Manual, Crystal Red Metallic:
https://www.corvetteforum.com/forums...39k-miles.html
Have a look? Thanks, Tom4x2.
#3
C6 For Sale
Good Morning,
I have a 2006 C6 LeMans Blue 3LT for sale with 38,000 original miles. This car is very, very clean and well put together.
This car was professionally built by Speed INC. in Chicage Ill. The car has been professionally maintained its entire life. The description to follow.
The car puts down 650RWHP on 93 octane and 711RWHP on E-85. I have dyno printout to share if you want them or you can contact Tony at Speed INC to verify. Better yet come and take a ride.
Carl B 2006 Corvette (M6)
2006 Corvette 3lt
Stock bottom end LS2 6.0L Engine
Vortech v3 supercharger with a 3.4" pulley (9-10psi)
Injector Dynamics ID1000 Injectors
DSX Flex Fuel Kit. 93 Octane and E85 compatible
Stainless Works 2" long tube headers with off-road x pipe
B&B Fusion axleback exhaust
Comp Cams custom grind camshaft with dual valve springs and hardened pushrods
Lonnies Performance dual pump fuel system
Mcloud RXT clutch and flywheel
RPM Level 6 TR6060 C6 z06 transmission
MGW shifter
RPM Level 4 z06 rear end assembly
Dewitts radiator
Aluminum drive shaft by Driveshaft Shop
Full factory C6 Z06 wide body
Factory C6 Z06 brake calipers
Hawk pads, drilled and slotted rotors
Centennial cup wheels
Full C6 Z06 suspension
C6 Z06 interior
Glass top
Built and Tuned by Speed Inc
I have several pictures of the car as well as a couple of vides of it running if you would want to hear what it sounds like. I cant seem to be able to load pics. Send me your email or text and I will send pics.
This car would cost over $80,000 to build. Im asking $33,900.
Im located in the St. Louis MO area and my name is
Carl 314-550-3639 give me a call and we can talk about the car.
I have a 2006 C6 LeMans Blue 3LT for sale with 38,000 original miles. This car is very, very clean and well put together.
This car was professionally built by Speed INC. in Chicage Ill. The car has been professionally maintained its entire life. The description to follow.
The car puts down 650RWHP on 93 octane and 711RWHP on E-85. I have dyno printout to share if you want them or you can contact Tony at Speed INC to verify. Better yet come and take a ride.
Carl B 2006 Corvette (M6)
2006 Corvette 3lt
Stock bottom end LS2 6.0L Engine
Vortech v3 supercharger with a 3.4" pulley (9-10psi)
Injector Dynamics ID1000 Injectors
DSX Flex Fuel Kit. 93 Octane and E85 compatible
Stainless Works 2" long tube headers with off-road x pipe
B&B Fusion axleback exhaust
Comp Cams custom grind camshaft with dual valve springs and hardened pushrods
Lonnies Performance dual pump fuel system
Mcloud RXT clutch and flywheel
RPM Level 6 TR6060 C6 z06 transmission
MGW shifter
RPM Level 4 z06 rear end assembly
Dewitts radiator
Aluminum drive shaft by Driveshaft Shop
Full factory C6 Z06 wide body
Factory C6 Z06 brake calipers
Hawk pads, drilled and slotted rotors
Centennial cup wheels
Full C6 Z06 suspension
C6 Z06 interior
Glass top
Built and Tuned by Speed Inc
I have several pictures of the car as well as a couple of vides of it running if you would want to hear what it sounds like. I cant seem to be able to load pics. Send me your email or text and I will send pics.
This car would cost over $80,000 to build. Im asking $33,900.
Im located in the St. Louis MO area and my name is
Carl 314-550-3639 give me a call and we can talk about the car.
#4
2009 VY coupe
I have an ad here for 2009 C6 VY, M6. please check it out.
#5
Good Morning,
I have a 2006 C6 LeMans Blue 3LT for sale with 38,000 original miles. This car is very, very clean and well put together.
This car was professionally built by Speed INC. in Chicage Ill. The car has been professionally maintained its entire life. The description to follow.
The car puts down 650RWHP on 93 octane and 711RWHP on E-85. I have dyno printout to share if you want them or you can contact Tony at Speed INC to verify. Better yet come and take a ride.
Carl B 2006 Corvette (M6)
2006 Corvette 3lt
Stock bottom end LS2 6.0L Engine
Vortech v3 supercharger with a 3.4" pulley (9-10psi)
Injector Dynamics ID1000 Injectors
DSX Flex Fuel Kit. 93 Octane and E85 compatible
Stainless Works 2" long tube headers with off-road x pipe
B&B Fusion axleback exhaust
Comp Cams custom grind camshaft with dual valve springs and hardened pushrods
Lonnies Performance dual pump fuel system
Mcloud RXT clutch and flywheel
RPM Level 6 TR6060 C6 z06 transmission
MGW shifter
RPM Level 4 z06 rear end assembly
Dewitts radiator
Aluminum drive shaft by Driveshaft Shop
Full factory C6 Z06 wide body
Factory C6 Z06 brake calipers
Hawk pads, drilled and slotted rotors
Centennial cup wheels
Full C6 Z06 suspension
C6 Z06 interior
Glass top
Built and Tuned by Speed Inc
I have several pictures of the car as well as a couple of vides of it running if you would want to hear what it sounds like. I cant seem to be able to load pics. Send me your email or text and I will send pics.
This car would cost over $80,000 to build. Im asking $33,900.
Im located in the St. Louis MO area and my name is
Carl 314-550-3639 give me a call and we can talk about the car.
I have a 2006 C6 LeMans Blue 3LT for sale with 38,000 original miles. This car is very, very clean and well put together.
This car was professionally built by Speed INC. in Chicage Ill. The car has been professionally maintained its entire life. The description to follow.
The car puts down 650RWHP on 93 octane and 711RWHP on E-85. I have dyno printout to share if you want them or you can contact Tony at Speed INC to verify. Better yet come and take a ride.
Carl B 2006 Corvette (M6)
2006 Corvette 3lt
Stock bottom end LS2 6.0L Engine
Vortech v3 supercharger with a 3.4" pulley (9-10psi)
Injector Dynamics ID1000 Injectors
DSX Flex Fuel Kit. 93 Octane and E85 compatible
Stainless Works 2" long tube headers with off-road x pipe
B&B Fusion axleback exhaust
Comp Cams custom grind camshaft with dual valve springs and hardened pushrods
Lonnies Performance dual pump fuel system
Mcloud RXT clutch and flywheel
RPM Level 6 TR6060 C6 z06 transmission
MGW shifter
RPM Level 4 z06 rear end assembly
Dewitts radiator
Aluminum drive shaft by Driveshaft Shop
Full factory C6 Z06 wide body
Factory C6 Z06 brake calipers
Hawk pads, drilled and slotted rotors
Centennial cup wheels
Full C6 Z06 suspension
C6 Z06 interior
Glass top
Built and Tuned by Speed Inc
I have several pictures of the car as well as a couple of vides of it running if you would want to hear what it sounds like. I cant seem to be able to load pics. Send me your email or text and I will send pics.
This car would cost over $80,000 to build. Im asking $33,900.
Im located in the St. Louis MO area and my name is
Carl 314-550-3639 give me a call and we can talk about the car.
The following users liked this post:
C6 Learning (11-19-2020)