What's the best dry kit for a 100shot?
#2
Melting Slicks
Member Since: May 2005
Location: Brownsville Tx
Posts: 2,231
Likes: 0
Received 0 Likes
on
0 Posts
Forget the nitrous...are you married??? I am ready RIGHT NOW.:o
and about the nitrous, try this:http://www.harrisspeedworks.com/shop...cat=365&page=1
You may still want to look into adding a bottle warmer, window switch, and purge solenoid to that as well.
Now seriously....are you married?
and about the nitrous, try this:http://www.harrisspeedworks.com/shop...cat=365&page=1
You may still want to look into adding a bottle warmer, window switch, and purge solenoid to that as well.
Now seriously....are you married?
#4
Advanced
Thread Starter
Member Since: Apr 2008
Location: Huntington NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Hey boys, Thanks for the reply. Sorry but i'm dating someone right now.
I like the Harris speed kit. Any other links to really good dry kits that you have used?
What would be the best way to run the nitros line from the motor compartment back to the trunk where the bottles would be? I would need to be able to uninstall it if I ever have to bring the car in for servicing.
Thanks,
Jennifer
07 Vette
I like the Harris speed kit. Any other links to really good dry kits that you have used?
What would be the best way to run the nitros line from the motor compartment back to the trunk where the bottles would be? I would need to be able to uninstall it if I ever have to bring the car in for servicing.
Thanks,
Jennifer
07 Vette
Last edited by VettChick; 04-28-2008 at 03:10 PM.
#5
Melting Slicks
Member Since: May 2005
Location: Brownsville Tx
Posts: 2,231
Likes: 0
Received 0 Likes
on
0 Posts
I'm a very young italian dude with a Z06 lol (don't like to give out too much personal info 'cause I'm trying to keep my identity a secret)...where are you from? I'd love to hang out and check out eachother's rides. I'm sure we could have a lot to talk about...what man doesn't love a chick who's into cars? Especially Vettes... I'm also looking into an n2o kit. You from the East Coast? Tri-State NY/CT/NJ area?
Take care!
Take care!
Hey heeeeeyyyy......I saw her first...dont make me go high order violence now...lol.
#7
Melting Slicks
Member Since: May 2005
Location: Brownsville Tx
Posts: 2,231
Likes: 0
Received 0 Likes
on
0 Posts
Hope she didnt take anything too seriously?!
#9
Safety Car
Member Since: Oct 2001
Location: Dallas/Valley Ranch TEXAS!!!
Posts: 4,945
Likes: 0
Received 0 Likes
on
0 Posts
Don't worry about uninstalling the line for service... a good installer will put a black cover over the line so it doesn't stick out, then you just tuck down in the side in back when you take it off the bottle... the noids and dry fogger can be hidden very easy... if you want to keep it real stealth you put the bottle in a gym bag in back with a tennis racket handle hanging out of the zipper My dry system is very in your face with the bottle, but everything else is totally hidden...
This is a GREAT place for info... sorry about the guys, don't let them run you off...
This is a GREAT place for info... sorry about the guys, don't let them run you off...
#10
Advanced
Thread Starter
Member Since: Apr 2008
Location: Huntington NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jeremy,
NICE VETTE! I'm gonna go with a dry system, 100shot - 125 just for messing around, no track:
http://www.harrisspeedworks.com/shop...cat=398&page=1
I'm assuming that if I must bring my 07 in for service that I would have to remove the nitrous plate, solenoid & Braided lines from under the hood, wouldn't I?
NICE VETTE! I'm gonna go with a dry system, 100shot - 125 just for messing around, no track:
http://www.harrisspeedworks.com/shop...cat=398&page=1
I'm assuming that if I must bring my 07 in for service that I would have to remove the nitrous plate, solenoid & Braided lines from under the hood, wouldn't I?
Last edited by VettChick; 04-28-2008 at 07:35 PM.
#11
Melting Slicks
Member Since: Feb 2006
Location: LAS VEGAS NV
Posts: 3,016
Likes: 0
Received 120 Likes
on
61 Posts
St. Jude Donor '08
Hi Jeremy,
NICE VETTE! I'm gonna go with a dry system, 100shot - 125 just for messing around, no track:
http://www.harrisspeedworks.com/shop...cat=398&page=1
I'm assuming that if I must bring my 07 in for service that I would have to remove the nitrous plate, solenoid & Braided lines from under the hood, wouldn't I?
NICE VETTE! I'm gonna go with a dry system, 100shot - 125 just for messing around, no track:
http://www.harrisspeedworks.com/shop...cat=398&page=1
I'm assuming that if I must bring my 07 in for service that I would have to remove the nitrous plate, solenoid & Braided lines from under the hood, wouldn't I?
warranty will be void if they see the N20
#13
Melting Slicks
Member Since: Feb 2006
Location: LAS VEGAS NV
Posts: 3,016
Likes: 0
Received 120 Likes
on
61 Posts
St. Jude Donor '08
When i had the stock ls6 engine a few years ago, i blew it up running a 150 shot (wet TNT kit) they underrate the HP ( I feel it was more like a 175-200 shot.)
Anywho the service manager was cool and said "dont worry about it"(yea right) , until chevy sent out a warranty inspector to see what happend and he basicly saw the lines that are run through the carpet and did not cover it.. the bottom line is they are not stupid and they WILL look for a reason NOT to cover it if you were to blow up the engine..(i think on the dry shot you tap into the fuel pressure line , which has to be cut...) , trust me chevy hates to pay for warranty $hit.. they will blame you.
for me it was no big deal b/c i was getting a forged engine and twin turbo setup down the road..so it just sped up the process
if you stick to 100-125 shot.. you will be fine.
I heard ZEX makes a kit , that watches the fuel and if it leans out it cuts the n20 down.. its very safe!!
good luck
Anywho the service manager was cool and said "dont worry about it"(yea right) , until chevy sent out a warranty inspector to see what happend and he basicly saw the lines that are run through the carpet and did not cover it.. the bottom line is they are not stupid and they WILL look for a reason NOT to cover it if you were to blow up the engine..(i think on the dry shot you tap into the fuel pressure line , which has to be cut...) , trust me chevy hates to pay for warranty $hit.. they will blame you.
for me it was no big deal b/c i was getting a forged engine and twin turbo setup down the road..so it just sped up the process
if you stick to 100-125 shot.. you will be fine.
I heard ZEX makes a kit , that watches the fuel and if it leans out it cuts the n20 down.. its very safe!!
good luck
#15
Instructor
www.nrgtechracing.com sells the Zex kit. I work there and we're trying to get more into the vette scene. I'm actually considering picking up a C6 Z06 within the next year. if your interested in ordering the ZEX kit, let me know
-Steve
-Steve
#16
Advanced
Thread Starter
Member Since: Apr 2008
Location: Huntington NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
if you stick to 100-125 shot.. you will be fine.
I plan on a 100-125shot dry possibly from Harris. I'll make sure the install is easily reversible. I don't plan on abusing the engine & DT but you never know when something unrelated will break like the a/c, electric window....and I'll have to bring it in. It kinda sucks to have to take everything out every time the car has to go in.
#17
Sorry to hear about the warranty situation!!
I plan on a 100-125shot dry possibly from Harris. I'll make sure the install is easily reversible. I don't plan on abusing the engine & DT but you never know when something unrelated will break like the a/c, electric window....and I'll have to bring it in. It kinda sucks to have to take everything out every time the car has to go in.
I plan on a 100-125shot dry possibly from Harris. I'll make sure the install is easily reversible. I don't plan on abusing the engine & DT but you never know when something unrelated will break like the a/c, electric window....and I'll have to bring it in. It kinda sucks to have to take everything out every time the car has to go in.
#18
Drifting
Member Since: May 2005
Location: Stamford CT
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
you guys are like horny dogs, whats the deal if a girl logs in you have to aready ask her if she's married/ dating. pathetic fellows,its time to grow up.
Remeber this is a vette forum not a dating forum!
Remeber this is a vette forum not a dating forum!
#19
Melting Slicks
Member Since: May 2005
Location: Brownsville Tx
Posts: 2,231
Likes: 0
Received 0 Likes
on
0 Posts
#20
Advanced
Thread Starter
Member Since: Apr 2008
Location: Huntington NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
i ordered the same kit, as well. Theirs a couple things the kit doesnt include; fpss, window switch, etc. My car is going through extensive work right now. I should have pics up in a week or so. I did mine a little different i used 2 5# bottles right behind the headrest, looks pretty trick.