Question about nitrous
Thread Starter
Instructor
Joined: Apr 2008
Posts: 124
Likes: 0
From: South Florida FL
Question about nitrous
Is there way if you have bolt on-s on to keep the tune for N/A pulls and when you want to spray it changes the tune that you have with no timing/tune for nitrous? Im looking at getting a kit but I don't want to lose the power that I have with my tune running without nitrous.
Is there a way to switch back and forth on the tune/map??
Is there a way to switch back and forth on the tune/map??
Melting Slicks
Joined: Nov 2007
Posts: 2,240
Likes: 51
From: South Carolina
Is there way if you have bolt on-s on to keep the tune for N/A pulls and when you want to spray it changes the tune that you have with no timing/tune for nitrous? Im looking at getting a kit but I don't want to lose the power that I have with my tune running without nitrous.
Is there a way to switch back and forth on the tune/map??
Is there a way to switch back and forth on the tune/map??
Racer
Joined: Jan 2008
Posts: 285
Likes: 0
From: Boca raton Florida
Melting Slicks
Joined: May 2005
Posts: 2,231
Likes: 0
From: Brownsville Tx
Run a dry nitrous kit. Once tuned for the dry nitrous kit, the computer will do everything for you, no manual switching back and forth between tunes. Spinmonster wrote a very detailed post on wet kits vs. dry kits not long ago. Look it up and you'll get a better idea of things.
Collections Hold
Joined: May 2003
Posts: 3,520
Likes: 2
From: Tacoma WA
We carry the Interface and it will do the fueling and timing pull, as well as progressing and will not effect the stock n/a tune. It's all plug and play for the most part and can be used for all styles of dry as well as wet. An absolutely revolutionary product. Add to that the MicroEdge and you have full control over any nitrous system. If you have any questions I would be glad to help, or PM if you like. You can read about them here:
RNS and the Interface
RNS and the Interface
