When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Seems like very few are doing nitrous on the C6Z - at least compared to the C5Z. My impression is that a lot more C5's had a nitrous kit compared to the C6 Z. [my C5Z had one].
Anyone else think the same? I'm cammed and thinking about a small-medium shot [100-150].
Lots of us are running Nitrous on our C6Z's. I've installed SEVERAL kits.
Get this... Heads, cam, headers (with obligatory tune..) and a 175 shot I made over 1,000 lbs-ft of torque with my C6Z (and about 760 RWHP)!!!
I would advise you to spray the heck out of your C6Z!!!!
Haha - I like your style. I've got a Lethal cam in mine with all the supporting mods. Made 556 on a Mustang Dyno. Sounds like a 175 shot might be just what I need
I think it's just because there are more C5 Z06s, that's all. the percentage is probably pretty close. we have some killer packages just for the C5/C6 Z06s if your interested. that is dedicated kits specific to thses models.
Robert
Seems like very few are doing nitrous on the C6Z - at least compared to the C5Z. My impression is that a lot more C5's had a nitrous kit compared to the C6 Z. [my C5Z had one].
Anyone else think the same? I'm cammed and thinking about a small-medium shot [100-150].
We sell quite a few kits for the C6 Z. The most popular being the dry plate kit with Interface controller. Makes for a fun ride
Seems like very few are doing nitrous on the C6Z - at least compared to the C5Z. My impression is that a lot more C5's had a nitrous kit compared to the C6 Z. [my C5Z had one].
Anyone else think the same? I'm cammed and thinking about a small-medium shot [100-150].
Maybe its because the power of the C6 is adequate. The C5 needs a little kick. As a former SRT4 owner, I say that the C6 was harder to keep up with, the C5 I beat Many times.
Haha - I like your style. I've got a Lethal cam in mine with all the supporting mods. Made 556 on a Mustang Dyno. Sounds like a 175 shot might be just what I need
What supporting mods do you need for a cam?, seems to me that a cam is a mild modification and wouldnt need other supporting stuff.
What supporting mods do you need for a cam?, seems to me that a cam is a mild modification and wouldnt need other supporting stuff.
Standard stuff - CAI, ported TB, ported intake, headers, tune, etc. Just parts to open the intake/exhaust to move as much air as possible. I wouldn't exactly call it a 'mild' mod...and I [personally] wouldn't do a cam without at least CAI, headers, and tune.
Additionally, when I did my cam I upgraded the springs and rockers.
Last edited by PewterFRC; Feb 2, 2009 at 04:04 PM.
I think it's just because there are more C5 Z06s, that's all. the percentage is probably pretty close. we have some killer packages just for the C5/C6 Z06s if your interested. that is dedicated kits specific to thses models.
Robert
Hey Robert, do you have a kit with tiny bottles that can be hidden easily?
how is the ram dual disk holding up? would you buy another one? thanks!
VetteAir / Carlos installed mine and no problems. I have 10,000 miles on ram and all is fine. I don't track the car and never side step.
Window switch for NOS is set at 3500 on and 6700 off.
Not sure if i will purchase Ram again...depends on how long this one holds together.