When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here are a few I quickly found on the server we have installed.
This specfic photo is not a car we built, but we sell and use these defi gauges very often.
We also installed some gauges in the driver side air vent on the C6's.
If it were me, I like the defi gauges with playback and peak hold features. The gauges also are superior quality to most competitors. They even match the stock gauges almost to a tee!
-Brandon
I plan on using the Defi gauges on my install, but I noticed they are 60mm gauges. Are you guys making custom pillar pods, or is there enough room to enlarge the 52mm hole to 60mm on the pre-fabricated pillar pods?
What does something like that cost installed, maybe a two pod one. I'd like boost & oil pressure only.
2 Pod setup I got from Summit is $59 bucks, super comp 2 boost gauage was like 80 bucks, aerforce is 229 plus 20 dollars for a warning light and there are additional sensors you can buy like wide band air fuel which is 189 ( which is still cheaper than a AEM or any other good A/f gauge) and its all in one.
If you want boost and oil pressure only. Boost you can buy like i did depending on what style gauge. Oil pressure is already built into your car why would you want that? IMO Boost and A/f are the most important if you want to buy two analog gauges.
I plan on using the Defi gauges on my install, but I noticed they are 60mm gauges. Are you guys making custom pillar pods, or is there enough room to enlarge the 52mm hole to 60mm on the pre-fabricated pillar pods?
Defi makes a nice gauge!
You can enlarge the 52mm pillar pod housings
I plan on using the Defi gauges on my install, but I noticed they are 60mm gauges. Are you guys making custom pillar pods, or is there enough room to enlarge the 52mm hole to 60mm on the pre-fabricated pillar pods?
There is enough room to enlarge the Auto Meter pods to fit the 60MM cups, we can enlarge them properly if you don't have access to hole saws or dremel type rotating grinders.
thanks for all the pics. they look great. very nice. How is the fit quality on these, there are single, dual and triple pods it looks like. does the color match our interiors?
There is enough room to enlarge the Auto Meter pods to fit the 60MM cups, we can enlarge them properly if you don't have access to hole saws or dremel type rotating grinders.
But short story is we enlarge the 52mm pods.
-Brandon
Awesome! Looks like I'll be doing the Defi gauges! I love those things.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.