C6 Forced Induction/Nitrous C6 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

What's the best gears for A6 in the 1/4

Thread Tools
 
Search this Thread
 
Old 07-07-2009, 09:57 PM
  #1  
Streetfast
Burning Brakes
Thread Starter
 
Streetfast's Avatar
 
Member Since: Jul 2008
Location: port Orange FL
Posts: 754
Received 3 Likes on 2 Posts

Default What's the best gears for A6 in the 1/4

Who is running the 1/4 with there A6 and what gears are you running. What is the best gear for 700 rwhp.
Old 07-08-2009, 07:42 AM
  #2  
RCC
Burning Brakes
 
RCC's Avatar
 
Member Since: Jun 2008
Location: Willis Texas
Posts: 774
Likes: 0
Received 2 Likes on 2 Posts
Default

I ran a 3.15 rear gear with my A6. Didnt want to go any lower due to the ultra low first gear in the A6. If your interested in a aftermarket setup, I converted my car to 4L80.. I have a DTE stage 3 with the good shafts and 3.15 gear. It has less than a 1000 miles on it. PM me if your interested.
Old 07-08-2009, 06:44 PM
  #3  
DOUG @ ECS
Premium Supporting Vendor
 
DOUG @ ECS's Avatar
 
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,321
Received 1,090 Likes on 658 Posts

Default

Agreed on the 3.15's, 3.42's would be to much for 700rwhp IMO.
Old 07-08-2009, 07:05 PM
  #4  
Streetfast
Burning Brakes
Thread Starter
 
Streetfast's Avatar
 
Member Since: Jul 2008
Location: port Orange FL
Posts: 754
Received 3 Likes on 2 Posts

Default

Originally Posted by DOUG @ ECS
Agreed on the 3.15's, 3.42's would be to much for 700rwhp IMO.
Thats good enough for me.

Get notified of new replies

To What's the best gears for A6 in the 1/4




Quick Reply: What's the best gears for A6 in the 1/4



All times are GMT -4. The time now is 05:19 PM.