When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well we build a badass car for our customer Gus and the dam thing does 9.75@157 on a nitto and he decides that he wants a TTIX So we ordered the kit and its sitting at the shop in three boxes So before we took it down for the TTIX we took it out one last time to run it in Baytown at the LMR rental. Now this is weekly driven street monster on E85. We get alot of questions so here is the breakdown of Gus's car. I will provide some much needed pictures of this badboy and the install process will be documented in this thread.
A&A YSI kit with procharger BOV
Flipdrive
ERL Superdeck 1
Mast heads
Lethal Performance MPH cam Ver1
ARH 2inch headers
Lethal Performance custom exhaust and NB tip
ID2000
RSI triple with Lethal AN -10 setup
RPS triple and scatter shield
And all the other nick nacks you can think of
LMAO Maybe if we go to the next Dallas event you can take a shot at it with the TTIX
"No lifting pedal" driver ripped the track prep off our track on that last pass.
Hope he didn't take that joke to seriously during lunch. He can wind out those gears with the best of them. However, I almost walked away as I was almost in tears laughing so hard at that joke about me launching and him shifting. That is what racing true street cars is all about.
I have no problem shaking your hand and losing. Problem is, I won't lose with the 2200 and more spray from a roll. We will dial in the spray and get it up to a 150 shot. Just make sure the car doesn't have any lag, or the race is over on the hit and I'll be gone.
(Smack talking between friends for people reading this)
You guys let me know when you come around to the DFW! I should be somewhere in the 9s all motor pretty soon
Should make for some good races!
LOL We could have put an auto and built it for 8's No built rear.stock tq tube. never launched hard. The only time this car will make it to the big D is if we go to the TSS event. Other than that you would have to roll up on it in the streets of SA
"No lifting pedal" driver ripped the track prep off our track on that last pass.
Hope he didn't take that joke to seriously during lunch. He can wind out those gears with the best of them. However, I almost walked away as I was almost in tears laughing so hard at that joke about me launching and him shifting. That is what racing true street cars is all about.
I have no problem shaking your hand and losing. Problem is, I won't lose with the 2200 and more spray from a roll. We will dial in the spray and get it up to a 150 shot. Just make sure the car doesn't have any lag, or the race is over on the hit and I'll be gone.
(Smack talking between friends for people reading this)
I LOLed so hard when yall said that! No problem on the handshake but Ill be nice and put a gopro on the side and the rear for you so I can get a great view of your car from the rear!!!! All in good fun Mark!
Lethal Z06 is on his butt to put the hardened parts so we can try to launch the car. Ill post pics of the TTIX tomorrow.
I would love to see that ! I am surprised none of you boys have slapped on a drag pack to see if you can beat up the 60ft. Congrats man, your videos have kept me sane over the cold winter months
I would love to see that ! I am surprised none of you boys have slapped on a drag pack to see if you can beat up the 60ft. Congrats man, your videos have kept me sane over the cold winter months
Thanks LB Your 159 is no joke!
Originally Posted by Arun@CCP
Nice runs guys!
Sad to see your going to the other side.
1200 rwhp TTix shoud be good for another 2mph over the YSi.
I know. I know. Im keeping my YSI and if the 8rib wont cut it your first on my hit list Arun!
[QUOTE=JMBLOWNWS6;1580132101]Ill ask brotha. Ill be there tomorrow
Got off the phone with Gus a little while ago, They won't fit Danny's ZR1, So there mine.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.