Drag radials
Thread Starter
Racer
Joined: Nov 2007
Posts: 421
Likes: 4
From: oxnard ca
Drag radials
OK guys my ysi car makes mid 800's at the wheels, Im going to buy some f14 wheels in 18x10 and 18x12. I know im going to go with 345-35-18 mt street radial 2's for the rear, but what would be a good size and tire for the front? The car is mainly a street car that sees a few bursts of speed every now and then.
Racer
Joined: May 2010
Posts: 254
Likes: 1
From: Ellicott City MD
Look into the Nitto NTO5 275/40/18's. They have a similar tread pattern. They should fit and will not give you problems with the antilock system as the tires will be within one inch Dia of each other.
Racer
Joined: May 2010
Posts: 254
Likes: 1
From: Ellicott City MD
Thread Starter
Racer
Joined: Nov 2007
Posts: 421
Likes: 4
From: oxnard ca
Check this thread for more info
http://forums.corvetteforum.com/c6-f...nd-fronts.html
http://forums.corvetteforum.com/c6-f...nd-fronts.html
Melting Slicks
Joined: Feb 2008
Posts: 3,400
Likes: 3
From: Gboro/H-point/Reidsville NC
OK guys my ysi car makes mid 800's at the wheels, Im going to buy some f14 wheels in 18x10 and 18x12. I know im going to go with 345-35-18 mt street radial 2's for the rear, but what would be a good size and tire for the front? The car is mainly a street car that sees a few bursts of speed every now and then.
http://toyotires.com/tire/pattern/proxes-tq
