2008 Z06 2 step
#1
Racer
Thread Starter
2008 Z06 2 step
Last edited by rzmnco; 03-05-2013 at 01:09 AM.
#4
Racer
Thread Starter
#5
Le Mans Master
OP, do you know what a 2 step is for? They are basically useless for 99.9% of corvette owners, including myself, and I love to race.
It is a great tool for launching a car with a bias ply tire, fully built rear end, and a clutch dump. One of the best examples, is "RobZ". Car is amazing with a fantastic driver. His car has run .3-.5 faster than my car, while I had 200hp more. It's all what you want, but a 2 step for sounding cool is not what I would go for. It's strictly for money dig racing, or the track on a dialed in car. Useless besides that. I've gone 1.4's in the 60 without one on radials and no light skinnies up front.
It is a great tool for launching a car with a bias ply tire, fully built rear end, and a clutch dump. One of the best examples, is "RobZ". Car is amazing with a fantastic driver. His car has run .3-.5 faster than my car, while I had 200hp more. It's all what you want, but a 2 step for sounding cool is not what I would go for. It's strictly for money dig racing, or the track on a dialed in car. Useless besides that. I've gone 1.4's in the 60 without one on radials and no light skinnies up front.
#8
Burning Brakes
No sir... this is my car and it is definitely a MSD 2step. Taken care of by ECS. I just have it set at 5300 for ***** and giggles. I'll set it back down to 2500k if I ever want to go back to the track and launch it. Thanks.
#9
Racer
Thread Starter
We'll I verified with the owner, it's the MSD 2 step, he bought used for $150.
And yes I know what a 2 step is used for... I want it...
^ That is his youtube account
And yes I know what a 2 step is used for... I want it...
^ That is his youtube account
Last edited by rzmnco; 03-05-2013 at 01:08 AM.
#10
Burning Brakes
anyway, its set high on 5300 RPM so i can scare the crap out of people. When I want to launch at the track, it will be set back down around 2500 to 3000 RPM.
Flames are coming from the meth kicking in.... since the rpm is set high for the 2step....plus no CATs and no mufflers.
Last edited by seung012; 03-05-2013 at 01:23 AM.
#12
OP, do you know what a 2 step is for? They are basically useless for 99.9% of corvette owners, including myself, and I love to race.
It is a great tool for launching a car with a bias ply tire, fully built rear end, and a clutch dump. One of the best examples, is "RobZ". Car is amazing with a fantastic driver. His car has run .3-.5 faster than my car, while I had 200hp more. It's all what you want, but a 2 step for sounding cool is not what I would go for. It's strictly for money dig racing, or the track on a dialed in car. Useless besides that. I've gone 1.4's in the 60 without one on radials and no light skinnies up front.
It is a great tool for launching a car with a bias ply tire, fully built rear end, and a clutch dump. One of the best examples, is "RobZ". Car is amazing with a fantastic driver. His car has run .3-.5 faster than my car, while I had 200hp more. It's all what you want, but a 2 step for sounding cool is not what I would go for. It's strictly for money dig racing, or the track on a dialed in car. Useless besides that. I've gone 1.4's in the 60 without one on radials and no light skinnies up front.
Sounds awesome dont get me wrong but I think if you try it at the track you will probably need to call AAA for a ride home..
#13
Anybody try this http://www.npcompleteperformance.com/wotbox in a C6 Zo6?
No lift shift and launch control in one small package sounds too good to be true. I would abandon the idea of an automatic swap if this worked in my 08 Z06.
No lift shift and launch control in one small package sounds too good to be true. I would abandon the idea of an automatic swap if this worked in my 08 Z06.
#14
Melting Slicks
Anybody try this http://www.npcompleteperformance.com/wotbox in a C6 Zo6?
No lift shift and launch control in one small package sounds too good to be true. I would abandon the idea of an automatic swap if this worked in my 08 Z06.
No lift shift and launch control in one small package sounds too good to be true. I would abandon the idea of an automatic swap if this worked in my 08 Z06.
Interesting if it works though.