Sounded amazing, looked even better:
It begins...
Thread Starter
Racer
Joined: Feb 2014
Posts: 349
Likes: 0
From: Austin Texas
St. Jude Donor '14
It begins...
Dropped her off today:
As I get pics while it's being worked on I'll update. Mod list is up in my "garage" on the forum!
I'd have taken pictures from my tour of the shop but they had a lot of dev projects and high profile stuff so I wasn't allowed any. I will say this: it's the man's version of ***** Wonka's chocolate factory! Super cool place and lots of good people cranking away on some very neat things. Definitely enjoyed that, and the 19hr drive through the mid west to get there lol.
As I get pics while it's being worked on I'll update. Mod list is up in my "garage" on the forum!
I'd have taken pictures from my tour of the shop but they had a lot of dev projects and high profile stuff so I wasn't allowed any. I will say this: it's the man's version of ***** Wonka's chocolate factory! Super cool place and lots of good people cranking away on some very neat things. Definitely enjoyed that, and the 19hr drive through the mid west to get there lol.
Thread Starter
Racer
Joined: Feb 2014
Posts: 349
Likes: 0
From: Austin Texas
St. Jude Donor '14
Yea I figured if I hang out in front of their shop long enough they'll be forced to hook me up with a sweet deal on a package install 
short of that I'll buy a ridiculously overpriced ticket at the tiny airport and fly home.. Not sure which sounds more fun 
short of that I'll buy a ridiculously overpriced ticket at the tiny airport and fly home.. Not sure which sounds more fun
Last edited by DillingerRadio; May 2, 2014 at 12:01 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Racer
Joined: Jan 2013
Posts: 471
Likes: 62
From: Caliente Houston Tejas
HA!!!
I was thinking similar as I looked over the pics. Poster drover from Austin to take his car to LPE for the install??? Shoot, he could of simply come up I-10 to Katy and came to my garage - I/we could of knocked it out in a weekend. I would of cut you a deal - 50% off whatever LPE charged you
Ouch! Shots Fired!
I was thinking similar as I looked over the pics. Poster drover from Austin to take his car to LPE for the install??? Shoot, he could of simply come up I-10 to Katy and came to my garage - I/we could of knocked it out in a weekend. I would of cut you a deal - 50% off whatever LPE charged you
Ouch! Shots Fired!
Drifting
Joined: Sep 2008
Posts: 1,884
Likes: 210
From: Somewhere on earth
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
Burning Brakes
Joined: Nov 2008
Posts: 908
Likes: 66
From: Lower RGV
St. Jude Donor '10-'11-'12
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
I'm as relaxed as can be. Too many smart asses around to get excited about another one. Nothing more boring than a battle of wits with an unarmed opponent. Have a nice night trolling forums.
Thread Starter
Racer
Joined: Feb 2014
Posts: 349
Likes: 0
From: Austin Texas
St. Jude Donor '14
Don't give a ***** about your opinion so you're good silver bullet
They do have several lifts, but they're also doing a ton of builds - frankly I don't really care, what does it matter how my car stays up in the air? It doesn't the only thing that matters is the build and quality of the work which is top notch!
Also I probably could've gone local and saved myself time (and maybe a little bit of money) but when I was a kid I wanted a Lingenfelter. It was and is THE name for Corvette. Don't get me wrong here, there are a few other great shops that have popped up but Lingenfelter is the one I've always known and wanted.
They do have several lifts, but they're also doing a ton of builds - frankly I don't really care, what does it matter how my car stays up in the air? It doesn't
the only thing that matters is the build and quality of the work which is top notch!Also I probably could've gone local and saved myself time (and maybe a little bit of money) but when I was a kid I wanted a Lingenfelter. It was and is THE name for Corvette. Don't get me wrong here, there are a few other great shops that have popped up but Lingenfelter is the one I've always known and wanted.
