spark plug and gap boost e85
Thread Starter
Racer
Joined: Jan 2007
Posts: 447
Likes: 11
From: New York
spark plug and gap boost e85
what spark plug and gap should i use?
next week i should be done and ready to start here up
my setup:
forged ls2 with cr10
ecs baby blower cam
ecs sl1500 with no restrictor plate about 14 psi
e85
1 7/8 headera no cats
i have a new set of NGK Iridium TR6IX is that ok?
next week i should be done and ready to start here up
my setup:
forged ls2 with cr10
ecs baby blower cam
ecs sl1500 with no restrictor plate about 14 psi
e85
1 7/8 headera no cats
i have a new set of NGK Iridium TR6IX is that ok?
Last edited by n_brio; Dec 22, 2014 at 02:39 PM.
Melting Slicks
Joined: Apr 2007
Posts: 2,987
Likes: 16
From: Phoenix
No. You want at least a 7 heat range. TR7IX if you want iridium and gap them at .028"-.030". I run the TR7IX at .030" in mine. If you want to do a copper plug, get the BR7EF and gap it the same .028"-.030". If you plan on adding a shot of nitrous I would not do the TR7IX. You want a non-projected tip plug if using any nitrous. TR7IX is projected and the BR7EF is non-projected.
