5x4.75 Lug Pattern Weld Wheels?

Reply Subscribe

Thread Tools

Search this Thread

Jul 4, 2014 | 07:35 AM

getburnt

Thread Starter

Pro

Joined: Jan 2011

Posts: 554

Likes: 1

From: Evington VA

5x4.75 Lug Pattern Weld Wheels?

I made a mistake and ordered my 15in Weld wheels in 5x4.75 instead of 5x120mm. Obviously there is a very slight difference, but will it be ok to run them? I would normally just exchange them but they are backordered until August and I have a big race Aug 1st!

Jul 4, 2014 | 09:00 AM

jon6.0

Melting Slicks

Joined: Apr 2007

Posts: 2,987

Likes: 16

From: Phoenix

You're fine dude. I ran 5x4.75 on my GTO that called for 5x120. 5x4.75=5x120.65 and .65mm is such a small difference that they really may as well be the same.

Jul 4, 2014 | 09:41 AM

getburnt

Thread Starter

Pro

Joined: Jan 2011

Posts: 554

Likes: 1

From: Evington VA

Awesome thanks man! I knew how close it was I just wanted to be sure. It will be my first time down the track and the car may be a handful so I wanted to make sure everything is in order.

Jul 5, 2014 | 04:43 PM

Shoaf85

Drifting

Joined: Nov 2007

Posts: 1,261

Likes: 26

From: Concord NC

I thought 5x4.75 was the correct bolt pattern for corvettes? Like posted above they usually interchange without issue but I still think that 5x4.75 is correct.

BTW I have been wrong before but I just ordered all 4 of my new wheels 5x4.75 LOL

Jul 5, 2014 | 05:17 PM

getburnt

Thread Starter

Pro

Joined: Jan 2011

Posts: 554

Likes: 1

From: Evington VA

According to Weld the correct one is 5x120mm.

But after doing a little more reading the difference is about the width of a credit card divided between 5 lugs.

Jul 7, 2014 | 07:10 AM

narfdanarf

Pro

Joined: Nov 2007

Posts: 661

Likes: 2

No it's 5x120.65 which is 5x4.75....a lot of people have put BMW wheels on though because they are 5x120 and fit good enough. If you've ever tried to fit them you can tell they are slightly off.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump