C6Z TT kit wanted!
Drifting
Joined: Oct 2011
Posts: 1,709
Likes: 16
From: pembroke pines (broward) florida
Team Owner
Joined: Nov 2007
Posts: 24,035
Likes: 2,342
From: Gilbert AZ
Check with IPS, obviously they know how to do a big power TT build. LMR does too. Redline in Florida. It really just depends where you are. There are no 1200+hp bolt on kits from what I've seen, so no matter what you have some custom work to do.
Speedy
Joined: Mar 2007
Posts: 6,110
Likes: 931
From: Tn
2024 C8 of the Year Finalist - Modified
Vengeance racing
Custom twin 78mm turbo system here, makes 1800rwhp on a conservative tune
Holds the record for Half mile racing at 203mph set when it was 1350rwhp
Drives on the street with minimal lag about 6k miles a year.
The setup is now two years old and unlike the majority of super high HP builds you see that fall off the forum I continue to drive and race the car and have not sold it.
Full build
Vengeance Racing
Holds the record for Half mile racing at 203mph set when it was 1350rwhp
Drives on the street with minimal lag about 6k miles a year.
The setup is now two years old and unlike the majority of super high HP builds you see that fall off the forum I continue to drive and race the car and have not sold it.
Full build
Vengeance Racing
Last edited by SinisterC6; Jul 15, 2015 at 12:00 PM.
Team Owner
Joined: Nov 2007
Posts: 24,035
Likes: 2,342
From: Gilbert AZ
Yep, can't believe I forgot about that car.
Good point on the high HP cars that get driven. I swear I have the only 1k+ blower car that actually gets miles put on it and used as a daily. I probably have more miles doing home depot and grocery runs in it than most 1k+ builds do in a year. The difference between making a number, and building a car that is reliable to beat on all the time is huge.
Good point on the high HP cars that get driven. I swear I have the only 1k+ blower car that actually gets miles put on it and used as a daily. I probably have more miles doing home depot and grocery runs in it than most 1k+ builds do in a year. The difference between making a number, and building a car that is reliable to beat on all the time is huge.
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
I've seen people making over 1300rwhp with APS kit and upgraded turbos
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Nov 2007
Posts: 24,035
Likes: 2,342
From: Gilbert AZ
Yes, with more work and upgraded turbos, and upgraded intercoolers, etc. Which goes back to nothing off the shelf that bolts right on and makes 1200+. Maybe the IPS kit.
DKT did, but they are out of business last time I checked. Get Fins used DKT kit.
DKT did, but they are out of business last time I checked. Get Fins used DKT kit.
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
IPS has a ready kit?
Drifting
Joined: Jan 2013
Posts: 1,482
Likes: 35
Fabrege or how ever you spell it makes the kits people used to know as ips kits.
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
I need a full ready kit cause there is no chance that I'll be able to customize or build a kit.
I can get a ready kit and get upgraded turbos
But at least to have a ready kit that requires no custom work
Just turbos
Drifting
Joined: Dec 2003
Posts: 1,755
Likes: 88
From: Pearland Texas
Danny at Lethal in SA. Is selling his DKT 67/66 kit and its complete with radiator and a lot of stuff made 1400+rwhp. I just talked to him last night and he asked if I knew anyone to let them know about it etc... Might give him a call as its a proven kit if your interested. GL!
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
Danny at Lethal in SA. Is selling his DKT 67/66 kit and its complete with radiator and a lot of stuff made 1400+rwhp. I just talked to him last night and he asked if I knew anyone to let them know about it etc... Might give him a call as its a proven kit if your interested. GL!
Drifting
Joined: Jan 2013
Posts: 1,482
Likes: 35
When I talked to the guys at pte they said they could still sell the turbos. Only requirement was they were ball bearing.
