gameover4

little update: car is back together for most part. Dyno day is in a week. Last minute upgrade to the YSI and dual pumps from A&A to be installed.

gameover4

Build:
LME 427, brodix BR7 heads done by LME, YSI w/2.85, 8rib, IW 10%, cam motion cam, ARH 2" headers, mantic triple, alky control meth, RPM Diff, Billy boat bullets
345 NT05R attempting to keep the road

Unreal

Should be fun. I'll be in New Orleans for first time next month for a week. Will be at the NASA thing there for work for a week.

neverstop

perfect street setup. should be super fun and not too dissimilar from my setup.

I can sense the future and it includes some 17" drag radials haha

with less power than you're making, my car would spin the 19" nt05r at 80-90mph sometimes

Mrbluedevil88

Very very nice build. I'm a big fan of going overboard this way in the future you have plenty of room to grow easily. Looking forward to why she puts down and 1/4 times

gameover4

nice, vette doesnt make it to many places actually in Nola bc of the road conditions. hit me up if you need restaurant and stuff to do reccomendations

Detoxx03

Lots of food and humidity in NOLA. Hopefully it doesn't rain too much for your visit but with it being Hurricane season that will be hard to avoid. Hit me up if you need any recommendations to places to eat or things to do.

Unreal

Let me know of must do things, only crappy part is work 8-5, then maybe have a little bit of evening time. Just a work thing.

gameover4

do you guys think i will need to get a flip drive with the ysi or is the AA kit w/8 rib good?

Unreal

With a 2.85 I would say yes.

lt1z

You need a flip drive on 8 rib when going smaller then a 3.25" pulley IME

gameover4

what systems are you guys running with your ysi? what size pulley to?

Unreal

ECS 10 rib, ECS cog mod, A&A Direct drive.

I would do 10 rib A&A with the new style 3 belt A&A DD if I was doing a new Ysi setup these days, since ECS doesn't do the cog mod anymore.

realcanuk

Agree, the new A&A DD looks awesome. I run 8 rib, the older style DD, and have no belt slip issues with a 3.0 pulley. Pretty sure would be fine with a 2.85 also.

gameover4

finally got car running and tuned. definitely disappointed in setup thus far but will be making some more mods/tweaks and try again. 730hp/610torq 13# boost
having some belt alignment issues that will be fixed real soon
i need to get the direct drive and a dewitts cutdown so i can go 4" inlet pipe. hopefully ill pick up some boost off these mods.

playtoy

13# with a YSI and a 2.85" pulley? Sounds like a lot of belt slip or a serious restriction on the inlet of the blower. Need to check for boost leaks also.

Detoxx03

I'm sure it has the Ti on it but even still those numbers are super low. Something is way off. Who's tuning it and working on it?

gameover4

i did work myself. Furtural tuned. 2.85 ysi making 13# boost. single serp 8 rib belt. i did have some misalignment that caused a rib to tear and we put new belt on. Futural said i need to put cut down dewitts and 4" inlet tube and ditch the stock A&A tube. my filter is a little dirty to so i know that isnt helping.

Detoxx03

It's Futral man.

Allan will get it figured out. I know that for sure.

gameover4

imma get the radiator fan setup and new tube and see what happens. i just want drive the ole girl at this point been down for 3 months lol