Cam
Thread Starter
Drifting
Joined: Jun 2019
Posts: 1,588
Likes: 149
From: California
Cam
in a 427 ls7 what kind of cam is this would this net 600whp NA with supporting mods and also
be able to have a blower with it like rpms b3 cam? Any cam exporters out there?
be able to have a blower with it like rpms b3 cam? Any cam exporters out there?
Last edited by GX427; Jun 18, 2019 at 09:18 AM.
Race Director
Joined: Mar 2011
Posts: 13,262
Likes: 3,150
From: SW Florida
2021 C6 of the Year Finalist - Modified
That's alot of cam and will be hard to tune. I also question the 'driveability' of this cam.
Also, with that much lift, this cam will be hell on valve springs.
Unless this car is a dedicated race car, why do you feel the need for this radical of cam?
If your planning on forced induction later on, I would opt for an LSA in the 118 degree range.
BTW ... the cam specs you show give an overlap of +18.0 degrees .... not daily driver friendly by any means
Also, with that much lift, this cam will be hell on valve springs.
Unless this car is a dedicated race car, why do you feel the need for this radical of cam?
If your planning on forced induction later on, I would opt for an LSA in the 118 degree range.
BTW ... the cam specs you show give an overlap of +18.0 degrees .... not daily driver friendly by any means
Thread Starter
Drifting
Joined: Jun 2019
Posts: 1,588
Likes: 149
From: California
I’m not worried about drivability or gas mileage the car is going. To be boosted but was wondering what it could do NA max effort if 600 was possible with that cna 11:1 but it is a daily driver I’ll be changing springs every 10k miles
Thread Starter
Drifting
Joined: Jun 2019
Posts: 1,588
Likes: 149
From: California
Forsure brother I probably am not clear so I already have this cam for my boosted application was wondering if this cam was ok for s boosted app since it’s kinda big and if it would make good power NA with supporting mods would it be close to 600whp on pimp I think these specs are close to the rpm b3 cam but more lift
Racer
Joined: Nov 2009
Posts: 397
Likes: 35
Forsure brother I probably am not clear so I already have this cam for my boosted application was wondering if this cam was ok for s boosted app since it’s kinda big and if it would make good power NA with supporting mods would it be close to 600whp on pimp I think these specs are close to the rpm b3 cam but more lift
